MAINTENANCE AND SECURITY

Replacing the Projection Lamp

The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer.

Important:

1.The lamp contains a certain amount of mercury and should be disposed of according to local or- dinance regulations.

2.Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.

Warning:

Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so could result in a severe burn.

1. Remove the screw on the lamp compartment cover.

2. Remove the lamp compartment cover.

Page 29
Image 29
Microtek MS4 user manual Maintenance and Security, Replacing the Projection Lamp