III. QUICK REFERENCE: TROUBLESHOOTING |
|
| |||
SYMPTOM |
| PROBLEM |
| SOLUTION | |
|
|
|
|
| |
Oven will not | No electrical power | • Check that the circuit breaker/fused disconnect is on. Make | |||
turn On. |
|
|
|
| sure the emergenct stop button is on. |
Oven will not |
| Faulty contactor | • | Replace contactor. | |
heat. |
|
|
|
|
|
|
| Faulty heater element | • | Replace element. | |
Oven is operating, but little |
| Air fingers may be as- | • Turn oven off, and allow to cool. Reassemble fingers correctly. | ||
or no air is coming from |
| sembled incorrectly after |
|
| |
the fingers. |
| cleaning. |
|
| |
Conveyor will not move. |
| Conveyor may be jammed. | • Turn oven off, and allow to cool. Check conveyor for blockage. | ||
SCREEN ALERTS |
|
|
|
|
SYMPTOM |
| PROBLEM | SOLUTION | |
|
|
|
|
|
High Control Compartment |
| Clean and replace the front | • Failure to do this will eventually shut down the oven due to | |
Temperature |
| fan filters. | excessive temperature. | |
Main Blower problem |
| The computer has detected | • This should be corrected by a qualified service technician. | |
or Combustion Blower |
| a problem with either the |
| |
problem. |
| main, or burner blowers. |
| |
Control Over Temp | Front filters are clogged | • Clean or replace filters. | ||
Front belt jammed | Front belt has stopped | • Remove obstruction, and restart oven. | ||
|
|
|
| • If no obstruction, call service. |
Rear Belt jammed | Rear belt has stopped | • Remove obstruction, and restart oven. | ||
|
|
|
| • If no obstruction, call service. |
High Temp Error | Thermocouple or | • Call service | ||
| PLC malfunction |
| ||
Belt | Normal operation until |
| ||
in temperature | Oven reaches operating |
| ||
| temperature |
| ||
Energy Saving Mode 1 | Normal operation |
| ||
Energy saving mode 2 | Normal operation |
| ||
Energy saving Mode 3 | Normal operation |
| ||
21 | P/N 60254 September 28, 2012 |
