BLUE STAR by MIDLAND
BR777 PROGRAMMING QUICK REFERENCE GUIDE
Setting the
Call Alert/
Vibrate Alert
-Press the MODE button until “CA” appears.
-Press the S or T button to select the Call Alert tone between 0~4.
-Selecting “0” will disable the Call Alert function.
-Selecting “1~3” will set the Call Alert tones.
-Selecting “4” will disable the Call Alert and enable the Vibrate Alert. The Vibrate Alert icon 
will appear on the display.
Setting the
VOX
Cloning the Radio setting
-Press the MODE button until “VOX” appears.
-Press the S or T button to set the VOX level.
Start this process without the Cloning Cable attached to the radios.
-Set both radios to Program mode.
-Press the MODE button until “CL” appears on both radios.
-Press the T button on Target radio. RX will appear.
-Press the S button on Source radio. TX will appear.
-Connect the Cloning Cable.
-Press again the T button on Target radio.
-Press again the S button on Source radio.
-“P” will appear on the display when Cloning is finished.
-Remove the Cloning Cable and turn off the radios.
