Model LXT340/345 Series | ® |
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT340/345 Series has 2 power level settings. To select the power level on channels 1~7 and 15~22, press the MENU button until a “Pr” icon will appear blinking on the display. Then press the 
/
buttons to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting.
!Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “oF” icon appears. Select “on” by pressing the 
/
buttons and push the PTT key, or press MENU button to move to the next feature setting.
To turn the ROGER BEEP tone off, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “on” icon appears. Select “oF” by pressing the 
/
buttons and push the PTT key, or press MENU button to move to the next feature setting.
SILENT OPERATION
Your LXT340/345 Series has a SILENT OPERATION mode. In this mode, all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “on” icon appears. Select “oF” by pressing the 
/
buttons and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “oF” icon appears. Select “on” by pressing the 
/
buttons and push the PTT key or MENU button.
Page 10 |
| www.midlandradio.com |
