Midland Radio LXT420, LXT320 owner manual Channel Selection GMRS/FRS Band, Setting Privacy Codes

Model LXT320/420 Series ®

CHANNEL SELECTION (GMRS/FRS BAND)

Press the MENU button once, and then the / buttons to select one of the 22 GMRS/FRS channels. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting.

SETTING PRIVACY CODES

Your LXT320/420 Series has 121 Privacy Codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the / buttons to select one of the 38 CTCSS Privacy Code. Press again the MENU button and the / button to select one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting.

!Note : If you select any CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa.

Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two LXT320/420 Series radios, all radios in your group must be set to the same channel

and Privacy Code selections.

TRANSMIT (TX) POWER LEVEL SELECTION

Your LXT320/420 has 2 power level settings. To select the power level on channels 1~7 and 15~22, press the MENU button until a “Pr” icon will appear blinking on the display. Then press the/buttons to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting. When the PTT button is pressed during Low Battery Level condition, the TX Power will automatically switch from Hi(H) to Lo(L) level.

!Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations.

Page 10 www.midlandradio.com