![](/images/new-backgrounds/1310428/31042815x1.webp)
Model LXT320/420 Series | ® |
OPERATING YOUR RADIO
POWER ON/OFF AND VOLUME
Press the POWER/MENU button for at least 3 seconds to turn the radio on/off. During Power On, the radio will beep 2 times with different tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected.
To increase/decrease the volume level, press the /
button during RX or STANDBY mode.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same channel and Privacy Code.
1.For maximum clarity, hold the radio 2 to 3 inches from your mouth.
2.Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting.
3.To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission.
ABOUT RANGE
Your LXT Series radios are designed to give you maximum range under optimum conditions.
Optimum Conditions are:
•Over water
•Open rural areas without obstructions
•Flat areas where you can see the other person
To ensure you get maximum range:
•Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions
•Be sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power
•Be sure to set your radio to use Hi power.
Page 8 |
| www.midlandradio.com |