Midland Radio LXT500/535 manual LCD Display Controls, Battery Installation

Models: LXT500/535

1 16
Download 16 pages 53.15 Kb
Page 4
Image 4

LCD DISPLAY

1

2

3

CONTROLS

7

8

9

10

4

5

6

11

12

13

14

15

1.LOW BATTERY ICON – Indicates the battery level is low.

2.TRANSMIT (TX) ICON – Indicates radio is transmitting a signal.

3.CHANNEL NUMBER – Changes from 1~22 on GMRS/FRS band.

4.KEY LOCK ICON – Indicates KEY LOCK mode is on.

5.RECEIVE (RX) ICON – Indicates radio is receiving a transmission.

6.TRANSMIT POWER LEVEL ICON – Indicates TX Power setting (H/L).

7.PTT Button – Press and hold to trans- mit voice communication.

8.ALL/LOCK Button – Press to send a CALL Alert signal. Press and hold to turn KEY LOCK on/off.

9.MIC – Built-in microphone.

10.SPEAKER – Built-in speaker.

11.ANTENNA

12.EXTERNAL SPEAKER/MIC/CHG. JACK

13.POWER / MENU Button – Press and hold for at least 3 seconds to turn the radio on/off. Press momentarily to access Menu mode.

14.SCAN Button – Press to enter SCAN mode.

15.UP ▲ and DOWN ▼ Buttons – Make adjustments in MENU mode.

BATTERY INSTALLATION

Your LXT500/535 Series radio operates with either a NiMH battery pack or optional 4 “AAA” alkaline batteries. The belt clip should be removed to ease installation or removal of the batteries.

To install the batteries:

1.With the back of the radio facing you, remove the belt clip (see diagram on next page) for easy access, then remove the Battery Cover by press- ing down on the top center and sliding it down from the radio.

2.Insert 4 “AAA” batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit.

3.Return the Battery Cover by sliding it up on the radio. Replace the belt clip, making sure it locks into place.

Page 4
Image 4
Midland Radio LXT500/535 manual LCD Display Controls, Battery Installation