Back panel connections | Midland Radio RG2B, RG2W specs

3.7Back panel (connections)

IWarning! Faulty connections or short-circuits may seriously damage REGATTA 2. Before attempting any connections, consult the specialized sections of this manual.

1)Antenna Jack

This SO 239 jack is for connecting an appropriate antenna.

2)Power cable

This red/black cable has to be connected to a power source of 12 V DC (red is positive. Attention: A converter is needed for 24 V power sources!

3)Jack for additional external loudspeaker

You can use this jack for the connection to a suitable external loudspeaker (optional), if needed.

4)GPS connector

Allows for connection to the optional receiver module for obtaining, viewing and transmitting (with DSC) information regarding position and current time data.

Page 8

Image 8

Midland Radio RG2B, RG2W manual Back panel connections

Contents

Regatta Table of Contents Maintenance Registration of your Marine Transceiver Above ALL... SafetySymbols used Serial number AssistanceManual Notes Introduction Description of Controls and Connectors Front panel Back panel connections Microphone MicrophonePTT push to talk Location for the transceiver InstallationContents of package Adjustment of angle Mounting the transceiver Installation of the antenna/electromagnetic exposure Mounting of Microphone Power Supply Male Regatta connector view AntennaConnections GPS device Volume regulation Basic OperationTurning Regatta 2 on/off Squelch Regulation Display lighting Selecting high and low transmission powerInstant recall of channel Scanning Functions Channel scanningDual Watch and Triple Watch Activation of Dual Watch/Triple Memory channels MEM mode Memory scanning Scan MemoryReception/Transmission during Scan Memory To delete/To jump a pre-selected channel in memory USE with GPS Digital Selective Calling DSC Sending a group call Group calling Group CallSending an individual call General call to all ships ALL Ship Safety ALL Ship Urgency DSC Distress callSending a call to all ships Sending a Distress call Listing L. Sinking M. Adrift Individual call Receiving a distress callGeneral call to all ships Customization Beep Enable/disable keypad beep LCD display contrast Maintenance ZONEAdjustment of UTC time deviationMmsi Setting of personal Mmsi code and Mmsi group code Maintenance and warnings Troubleshooting Receiver Technical SpecificationsTransmitter 160.650 160.700160.750 160.800 INT Can