Midland Radio WR120 User Notifications Alert Type Display, Voice or Tone, Reviewing Recent Alerts

WR-120 Owner’s Manual

User Notifications:

Alert Type (Display, Voice or Tone):

1.Press MENU to open menu options.

2.Press ▲ to scroll through menu to ALERT TYPE, then press SELECT.

3.Press ▲ to choose VOICE, TONE or DISPLAY then press SELECT.

4.Press MENU to exit menu mode.

Alert Type	Description
Display	When the DISPLAY alert type is chosen, only a
	text alert will scroll on the display. There will be
	no audible alarm.
Voice	When the VOICE alert type is chosen, the alert
	tone will sound for 8 seconds, then you will
	hear the voice of the weather broadcast for 3
	minutes.
Tone	When the TONE alert type is chosen, the alert
	tone will sound for 3 minutes, or until you press
	any button.

Reviewing Recent Alerts:

The WR-120 All Hazards Weather Alert Radio can store up to 10 different Weather/Hazard alerts (with overlapping effective times) in its memory. If the weather radio receives a new alert while any previous alert is still in effect, it automatically displays the new alert. You can review all alerts still in effect by pressing ▲ to scroll through the weather radio’s active alert memory. A double beep indicates the end of the list. “NO MESSAGE” will be displayed if no alerts are active.

Alert Test:

1.Press MENU to open menu options.

2.Press ▲ to scroll through menu to ALERT TEST.

3.Press SELECT to sound the alert siren.

4.Press any button to silence the siren or press MENU to exit menu mode. Note: Ensure ON/OFF switch is in the ON position

Set Channel/Volume:

1.Press MENU to open menu options.

2.Press ▲ to scroll through menu to SET CHANNEL then press SELECT.

3.Tune the channel to the desired broadcast by using ▲ or ▼.

4.Adjust the volume to a comfortable level by using VOLUME UP or

VOLUME DOWN.

5.Press MENU to exit menu mode.

Note: Ensure ON/OFF switch is in the ON position

page 8 www.midlandradio.com