Cleaning and care |
| |
| Select a program with a wash | |
| temperature between 122°F (50°C) | |
| and 149°F (65°C). | |
| Depending on the cleaning agent | |
| used, cleaning the grease filter in a | |
| dishwasher can cause permanent | |
| discoloration to the surface. However, | |
| this will not affect the functioning of | |
| the filter in any way. | |
To remove a grease filter, release the | After cleaning | |
After cleaning, leave the filters on an | ||
locking clip. Then, open the filter to a | absorbent surface to dry. | |
45° angle, unhook it, and remove it | ||
When removing the filter for cleaning, | ||
from the hood. | ||
Cleaning the grease filter by hand | also clean off any residues of oil or | |
fat from the now accessible casing to | ||
Clean the filters with a soft nylon | ||
prevent the risk of these catching fire. | ||
brush in a mild solution of hot water | Replace the grease filter, making sure | |
and dish soap. Do not use undiluted | that the locking clip is facing down | |
dish soap. | ||
towards the cooktop. | ||
|
Unsuitable cleaning agents
Unsuitable cleaners can cause damage to the filter surfaces if used regularly. Do not use any of the following:
–Lime removers
–Abrasive powders or abrasive liquids
–Aggressive
–Oven sprays
Cleaning the grease filter in a dishwasher
Place the filters as upright or inclined as possible in the lower basket. Ensure that the spray arm is not obstructed.
Use a common household dishwasher detergent.
If the filters have been installed incorrectly, you can insert a small screwdriver into the slit to disengage the locking clip.
20
