Miele 09 968 280 Reducer, Protective spacers, Wall bracket, M 6 locknuts, Lever

Installation

a3 protective installation sheets for use when installing the chimney

b1 exhaust connector

for an exhaust duct  6" (150 mm).

c1 reducer

for an exhaust duct  5" (125 mm).

d1 non-return flap

for installation in the outlet duct collar of the motor unit (not for recirculation mode). Depending on the device version, the non-return flap is already mounted.

e2 protective spacers

for use when fitting the chimney.

fWall bracket

for securing the hood on the wall.

gRecirculation kit for recirculation mode

contains diverter, aluminum hose and hose clamps (not contained in scope of delivery, available as optional accessory – see "Technical Data").

8 screws 3/16" x 2 3/8" (5 x 60 mm) and

8 plugs 5/16" x 2" (8 x 50 mm)

for attaching to the wall (not for use in USA / CDN).

The screws and plugs are designed for use in solid walls only.

Use different fasteners for other wall construction types.

Make sure that the wall can support the load.

2 x M 6 locknuts

for mounting the appliance unit.

2 screws 1/8" x 5/16" (3.9 x 7.5 mm)

are not required.

1 lever

for disassembling the chimney.

MontageInstallation

MontajeMontaggioMonteringMontagemAsennus

Installation sheet

25