Product and | Page 3 of 4 |
CS 1326 Y Tepan Yaki CombiSet |
|
|
|
|
|
The illustration above represents the attachment of spring clips 1 and support bars 2 for 3 appliances
An additional support bar is required for each additional appliance. The position for the attachment of an additional support bar depends on the width of appliance B.
Spring Clip installation | Spring Clip installation |
on wood or solid | on a granite |
surface countertop | countertop |
Place the supplied | Position and attach |
spring clips 1 and the | the spring clips 1 and |
support bars 2 at the | the support bars 2 |
marked positions as | with strong double- |
shown above, by | sided tape 3 |
laying them on the | Coat the side and |
upper edge of the cut- | lower edges of the |
out and then securing | spring clips with |
them with the 1/8” x 1” | silicone. |
(3.5 x 25 mm) screws | Fill the space between |
(supplied) | the support bars and |
Location Codes | the countertop with |
silicon | |
1 – Spring Clips |
|
2 – Support bars (Accessory, item - 27996029D CSZL 1500 (Includes cover 4)) |
|
|
|
3 – Space between support bar and countertop |
|
4 – Cover |
|
Notes |
|
All installations must be done in accordance with local codes. |
|
Drawing is not to scale | Specification Sheets OJS 02212012 |