Operation
Raising and lowering the browning unit
^To raise the browning unit, turn the
The browning unit will automatically extend to its full height, even when you release the control knob back to "ß". You can stop the unit at any height by briefly turning the control knob to "e".
^Turn the left control knob to Retract ("e"), and hold it until the desired height is reached or the browning unit is fully retracted.
The browning unit can be fully retracted only once the residual heat indicator goes out.
Switching on and off
Do not leave the appliance unattended while in use.
The appliance is switched on when the right control knob is turned to the desired setting, and is switched off when the knob is turned to "0".
The knob can be turned clockwise or
The ON light comes on when the appliance is in operation.
As soon as a certain temperature is reached, the residual heat indicator comes on as well. The indicator will not go out until the ceramic glass plate of the browning unit is safe to touch.
The appliance will not heat up unless the browning unit is raised to at least 2 3/4" (70 mm).
10
