Miele CS 1421 Attach the spring clips and support bars

Attach the spring clips andsupport bars

Wood or solid surface countertops

^Place the supplied spring clips a

and the support bars bat the

marked positions as shown above,

by laying them on the upper edge of

the cut-out and then securing them

with the 1/8" x 1" (3.5 x 25 mm) screws

(supplied).

Granite countertop

^Position and attach the spring clips

aand support bars bwith strong,

double-sided tape c.

The screws are not needed for granite

countertops.

Installation

25-30

25-30

Contents

Main Contents Correct use ~ Page Technical safety ~ Correct use ~ SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY Description of the unit Clean the appliance Before using for the first time Raising and lowering the browning unit Switching on and off Operation Browning Keeping food warm Useful tips After use Operation Safe retraction Height recognition Overheat protection Obstruction protection Safety features Care and cleaning Stainless steel Ledge Built-in frame Ceramic surface of the browning unit. Frequently asked questions Technical Service Page ~ Safety distances above the appliance Safety distances to the sides of the appliance Installation dimensions Cut out Installation of multiple appliances Countertop cut-out two appliances b Countertop cut-out three appliances b Page Page Attach the spring clips and support bars a c b a Page Installing the appliance Sealing Tiled surfaces , ,WARNING: THIS APPLIANCE MUST BE GROUNDED! Electrical connection Help protect our environment