Care and cleaning

Stainless steel

Use a non-abrasive stainless steel cleanser for cleaning the appliance. To help keep the appliance clean longer, we recommend using a stainless steel care product (see "Optional accessories"). Apply the product sparingly, using a soft cloth.

Do not use stainless steel cleanser on areas where there is printing. It will rub away the printing. Instead, use a soft sponge with some dish liquid and warm water to clean printed areas.

Ledge

Clean the ledge after each use, with a soft sponge, some dish washing liquid and warm water. Pre-soak any stubborn residue before cleaning. Dry all surfaces with a soft cloth.

Note: The ledge is not dishwasher safe.

The ledge can be removed for easier cleaning of the ledge and the underlying frame.

When re-inserting the ledge, check that it is positioned correctly. If it is not positioned correctly, the browning unit will not lower completely.

Built-in frame

Clean the built-in frame regularly. Always promptly remove food spatters and liquids. Clean the frame with a soft cloth, some dish detergent and warm water, and then dry with a soft cloth.

Ceramic surface of the browning unit.

First, remove any coarse residue with a damp cloth.

Next, clean the surface with a special cleaner for glass ceramic and stainless steel (see "Optional accessories"), on paper towel or a clean cloth. Do not apply cleaner while the surface is still hot, as this can leave spots. Follow the instructions indicated by the manufacturer of the cleaning product.

Finish by rinsing the ceramic surface with a damp cloth, then dry. Be sure to remove all cleaning product residue. Failure to do so can cause residue to burn into the surface during subsequent use, damaging the ceramic.

14

Page 14
Image 14
Miele CS 1421 installation instructions Stainless steel, Ledge, Built-in frame, Ceramic surface of the browning unit