First steps to use
Before using the coffee system for the first time
1. Clean the parts
Hand wash the coffee capsule plate with hot water and liquid dish soap.
The water tank can be washed in the dishwasher.
2. Fill the water tank
Open the appliance door.
Lift the water tank and pull it out.
Fill the container with fresh, cold tap water to the "Max." mark. Push the water tank back into the machine.
3. Fill the system with water
HOT WATER
1 2 3 4 5
Set a cup under the steam valve.
Turn the left jog shuttle to "Hot water".
Press the right jog shuttle.
The steam valve dispenses hot water.
Press the right jog shuttle again to turn the hot water off.
Turn the left jog shuttle to "Heating with steam".
Press the steam lever down.
Push the steam lever up when steam starts to be dispensed.
The lines are filled and the coffee system is ready to use.
4. Rinse the lines
RINSE
1 2 3 4 5
Turn the left jog shuttle to "Rinse".
Press the right jog shuttle.
Water runs from the coffee dispenser.
Press the steam lever down. Water runs from the steam valve.
Push the steam lever up after a few seconds.
12
