Miele CVA 2660 Exterior, Maintenance, Wipe any spills from descaling immediately, Jog shuttles

Models: CVA 2660

1 68
Download 68 pages 33.61 Kb
Page 40
Image 40
Exterior

Cleaning and care

Exterior

The front of the appliance can be cleaned with a sponge and a solution of warm water and non abrasive liquid dish soap. Dry with a soft cloth.

Only use a slightly damp sponge when cleaning the controls. Water could penetrate into the electronics and cause damage.

Wipe any spills from descaling immediately!

Stainless steel surfaces

Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner.

To help prevent soiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.

Jog shuttles

Clean the jog shuttles with a sponge and a solution of warm water and liquid dish soap.

￿These jog shuttles may become discolored or damaged if not cleaned regularly. Do not use a stainless steel cleaner on the jog shuttles.

Maintenance

The perforator should be changed after 15000 cups of coffee / espresso. The perforator can be purchased from Miele.

It is recommended to contact the Miele Service department for assistance in performing this maintenance task.

SETTINGS ￿

￿1 2 3 4 5 ￿ ￿ ￿ ￿ ￿ ￿

￿Turn the left jog shuttle to "Settings".

MAINTENANCE

￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

￿Turn the right jog shuttle to "Maintenance".

MAINTENANCE

carry out

￿

￿Press the right jog shuttle and turn it to "carry out".

￿Press the right jog shuttle.

40

Page 40
Image 40
Miele CVA 2660 Exterior, Maintenance, Wipe any spills from descaling immediately, Stainless steel surfaces, Jog shuttles