Installation
Installation
Make sure power is not supplied to the appliance while installation or maintenance work is performed. Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse. The coffee system must be installed into cabinetry before being used.
^Unscrew the height adjustable feet on the underside of the machine about 1/16" (2 mm).
^Push the appliance all the way back into the cabinet and center it. If necessary level the unit with the four height adjustable feet.
The feet can be turned out up to 3/8" (10 mm).
^If your cabinet has 3/4" (19 mm) side walls, drill four holes for the mounting.
^Center the unit and turn the screws a little bit in and then out again.
^Take the unit out of the niche and drill four holes at the screw markings (1/16" [2 mm], diameter 3/16"
[4.5 mm]).
^Connect the appliance to a cold water supply.
^Plug the appliance into the electrical outlet.
^Push the appliance into the niche.
^Open the door and partially tighten the screws.
^Carefully turn the lower screws, a, to center the machine.
^To secure the appliance in the cabinet, tighten the upper screws, b, by hand. Do not use an electric screwdriver.
59
