Miele CVA 615 operating instructions Fault messages, Message Possible fault Fix

Models: CVA 615

1 60
Download 60 pages 23.32 Kb
Page 47
Image 47

Fault messages

If an error occurs a fault message will appear. With the following guide, minor problems can be fixed without a service call.

Message

Possible fault

Fix

Fill coff. beans

Coffee bean container is empty.

Refill with coffee beans.

Ready for use

 

 

 

 

 

Brew unit block.

The brew unit is clogged.

Clean the brew unit.

 

 

 

Brew unit miss.

The brew unit is not properly seated.

Take out the brew unit and reseat.

 

 

 

Descale

The unit needs to be descaled.

Descale the unit.

 

 

 

Expel air

Air has built up in the system. The unit

Fill the water tank.

 

is blocked.

Turn the program selector to "On with

 

 

light" and place containers below the

 

 

hot water dispenser and the steam

 

 

nozzle.

 

 

Press the hot water button, turn the

 

 

steam selector counterclockwise

 

 

and let water run out until it streams

 

 

steadily.

 

 

Press the hot water button again.

 

 

Turn the steam selector to "o" to shut

 

 

off the water.

 

 

 

Fresh water?

A reminder to fill the water tank with

 

 

fresh water.

 

 

 

 

Waste unit miss.

The waste unit is missing or not seated

Return or reposition the waste unit.

 

properly.

 

 

 

 

Empty waste unit

The waste unit is full. The system will

Empty waste unit and press ENTER.

press ENTER.

not dispense coffee until the waste unit

 

 

is emptied.

 

 

 

 

Energy-save

The unit is in the energy-save mode.

Press ENTER.

mode . . .

Light is off.

 

press ENTER

 

 

 

 

 

Watersystem

There is a problem in the water lines.

Call Miele Technical Service.

fault

 

 

 

 

 

Fill watertank

The water tank is empty or missing or

Empty water tank, rinse, fill with fresh

 

the float in the water tank is stuck.

water and replace.

 

 

 

47

Page 47
Image 47
Miele CVA 615 operating instructions Fault messages, Message Possible fault Fix