Installation |
^Bolt the flange firmly to the ceiling us- ing the four M6 nuts.
^Shorten the power cable as much as possible and attach it to the terminal block inside the chimney. See "Elec- trical data".
Before connecting the appliance read the "Warning and Safety In- structions" and "Electrical data" sec- tions.
^Finally, being careful not to scratch the chimney, push the cover plate up- wards until the spring fixing clips click into place. If installed correctly, the cover should be secure and flush against the ceiling.
^Before using the appliance remove the grease filter and remove the pro- tective foil from the filter frame. Re- turn filter.
30
