Installation
a 2 hose clips
to secure the vent ducting to the vent connection.
b 2 runners
(1 x right, 1x left) to support the hood in the cabinet.
c 1 spacer strip
to conceal the gap between the rear of the appliance and the wall.
d Installation kit for recirculation mode
contains air outlet grille and hose (not supplied with the hood, optional accessory)
e Installation kit DML 300 to install a custom panel
contains retractable brackets and screws (not supplied with the hood, optional accessory)
8 screws 3.5 x 16 mm
to anchor the ventilation hood in the cabinet.
8 screws M4 x 12 mm
to anchor the ventilation hood at the runners.
4 screws could be used (alternatively to the plastic rivet) to fix the spacer bar.
2 screws 4 x 30 mm
to anchor the ventilation hood at rear wall.
4 plastic rivets
to connect the space bar with the appliance rear wall.
25
