Installation
1. Installing the space bar
T= K cabinet depth minus G hood depth
^The hood depth G depends on the custom panel:
–a Hood installed with a cabinet matching custom panel
–b Hood installed without front panel
These measures are only valid for the installation if the front panel sits flush with the cabinet corpus (without the door).
If the front panel should be installed recessed or flush with the cabinet door, adjust the measure T accordingly.
^Cut the supplied space bar to measure T.
Clip it with a knife at the predeter- mined breaking point of the next lower measure.
^Screw the space bar flush with the wall under the cabinet side walls.
^At the front edge of the spacer strip draw a vertical line on left and right side of the inside cabinet.
27