Installation
4. Secure the appliance
^Push the hood back so it sits flush with the front of the spacer strip.
^ Pull the deflector out. |
^Screw the hood, with 4 screws, onto the runners.
^Remove the installation protection between the deflector and casing.
^Drill respective holes and screw the fixing brackets to the wall or the cabinet rear wall.
^ Tighten the screws to the casing. |
^ Connect the space bar from the rear with 4 plastic rivets at the hood rear side.
^Loosen the screws of the fixing brackets on the hood top.
^Push the bracket flush to the wall or the cabinet back wall.
30
