Installation
3 protective shields to prevent scratches to the chimney during installation.
1 vent collar
for use with 6" (150 mm) exhaust ducting
1 reducing collar for use with 5"
(125 mm) exhaust ducting.
Telescopic retaining plate secures the chimney extension
Installation kit for recirculation mode contains diverter, hose and hose clips (optional accessory)
CAUTION
To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy.
(S8 wall anchors included in the packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the motor assembly.
2 screws 3.9 x 7.5 mm for securing the chimney.
1 lever for dismantling the chimney
Installation diagram
31
