Operation
Filter timers
Grease filters
A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned.
After the grease filters have been cleaned and put back in place, the grease filter timer must be reset.
To do this, press the grease filter button for approx. 3 seconds.
The indicator will go out.
Charcoal filter
Recirculation mode only
The timer for the charcoal filter is not preset. Please program this timer, see "Operation - Reprogramming the charcoal filter timer".
The charcoal filter indicator will light once the selected time has elapsed. The charcoal filter must then be replaced and the charcoal filter timer reset.
To do this, press the charcoal filter button for approx. 3 seconds.
The indicator will go out.
Checking the filter timers
Press the On/Off button to turn the fan on.
Press and hold the grease or charcoal filter button.
The number of flashing
1 indicator | = less than | 25 % |
2 indicators | = less than | 50 % |
3 indicators | = less than | 75 % |
4 indicators | = less than 100 % | |
This information will remain stored in memory in the event of a power failure.
14
