Water filter
Re-setting the filter indicator
The filter indicator still flashes in the display.
Touch the access button "" so it turns yellow.
Note the position of the button, but do not touch.
Touch the access button "" again so it turns white.
Only the access button "" is visible.
Place one finger on the position of the button and hold (the button will not be visible).
While holding down the button, press the access button "" once. Keep holding the button down until the following appears in the display (approx. 5 seconds).
Tap the button until an ^ appears in the display.
Touch the access button "" again.
By touching the button you can select the following settings:
^0: filter is installed
^1: filter is not installed (external filter)
^2: filter change confirmed
^
Tap the button until ^ 2 appears in the display.
^1 should only be selected if an external filter or bypass cartridge is being used. See "Deactivating the water filter".
Press and hold the access button "" for 2 seconds to confirm the filter change.
The filter is now reset.
38
