Switching on and off
Before using for the first time
^Clean the inside of the appliance and the accessories with warm water and a little
Important:
To ensure the correct functioning of the appliance, let it stand for between 11/2 and 2 hours after transporting it to its final location before connecting it to the mains.
Switching on
^Use a thin blunt object (e.g. a pencil) to press on the light coloured surface of the On/Off button.
The mains indicator light and the temperature indicator light will come on.
The appliance will start cooling.
The temperature indicator light will remain on until the set temperature has been reached.
Allow the appliance to run for a few hours before placing food in it. This will ensure that the temperature is sufficiently low.
Switching off
^Press on the light coloured surface of the On/Off button with a thin, blunt object.
All the indicator lights will go out and the cooling system will switch off.
Switching off for longer periods of time
If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday,
^switch the appliance off,
^switch off at the wall socket and withdraw the plug,
^defrost and clean the appliance out and
^leave the door ajar to air the appliance.
If, during a long absence, the appliance is switched off but not cleaned out and the door is left shut, there is a danger of mould and odours building up inside the appliance.
12
