Building in the appliance
^Stick the sealing strip to the side of the appliance on which the door is opened.
Building in
^Push the appliance into the niche. Make sure that the mains cable does not get trapped.
^Remove cover piece a if the niche height is not much greater than the height of the appliance.
^Push the appliance into the niche until the front edges of the hinge plates b are flush with the front edge of the housing unit above and below.
The upper edge of the cover piece must not lie against the edge of the housing unit.
^Push the appliance against the housing wall on the side on which the door opens so that the sealing strip is pressed into the housing wall c.
34
