Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Mains Connection

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the front of the plinth.The cooker must be connected by a competent person such as one who is a, NICEIC registered contractor to a suitable double-pole control unit with a minimum rating of 45A and a minimum contact clearance of 3mm, which should be fitted adjacent to the cooker, in accordance with IEE regulations. The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum. Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

Levelling

Two rear wheels and two front feet are fitted which can be adjusted up or down to set the height (900mm - 915mm) and level the cooker.

1.The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth.

2.The front feet can be simply screwed in or out to lower or raise the front of the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.

NOTE: Ensure oven shelves are level by using a spirit level on the rod shelves.

VIEWED FROM REAR

Siting the Cooker

The cooker is designed to fit between kitchen cabinets spaced 600mm apart.The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used freestanding. Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer 650mm.

NOTE: This appliance must NOT be fitted on a platform.

Moving the Cooker

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool.

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Radio Interference

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

5

Page 5
Image 5
Creda C561E/R561E manual Installation

C561E/R561E specifications

The Creda C561E/R561E is a versatile and efficient electric cooker designed to meet the needs of modern households. This appliance combines functionality with a sleek design, making it a staple in any kitchen. The primary focus of the C561E/R561E is user convenience, safety, and cooking performance.

One of the standout features of the Creda C561E/R561E is its dual-circuit ceramic hob. This cooking surface allows for rapid heating and has a smooth, easy-to-clean finish. The ceramic top comes with multiple cooking zones of varying sizes, accommodating various pot and pan dimensions. This flexibility helps to optimize cooking times and energy use, making it both efficient and effective.

The oven in the C561E/R561E offers a generous capacity, ideal for family meals or entertaining guests. It comes with a fan-assisted design that ensures consistent heat distribution throughout the oven cavity. This technology not only speeds up cooking times but also helps to retain moisture, resulting in better-tasting meals. The inclusion of multiple cooking functions, including variable grill and conventional oven settings, adds versatility to your cooking options.

Another important characteristic of the Creda C561E/R561E is its energy efficiency. It is designed with modern energy-saving technologies that help reduce power consumption without sacrificing performance. The energy-efficient design is particularly beneficial for those looking to lower their utility bills while being environmentally conscious.

Safety is a key consideration in the design of the C561E/R561E. The cooker is equipped with features such as an automatic shut-off function, which provides peace of mind for users. Additionally, the easy-to-read control panel and indicator lights ensure that you can monitor cooking progress at a glance.

The aesthetic appeal of the Creda C561E/R561E can't be overlooked. Its modern design with a clean finish fits seamlessly into any kitchen decor. The controls are intuitive and conveniently located, enhancing the overall user experience.

In summary, the Creda C561E/R561E is an excellent choice for anyone seeking a dependable electric cooker. With its combination of advanced technologies, safety features, and stylish design, it caters to various cooking needs while providing efficiency and ease of use. Whether you're an experienced chef or a novice cook, the Creda C561E/R561E is sure to elevate your culinary experience.