Use
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time shown in the time display.
The running time for the same program may vary depending on the intake water temperature, load size and soiling.
When a program is selected for the first time, a time is shown which equals an average program running time with cold water.
The time values in the program guide correspond to the program running times with standard loads and temperatures.
Each time a program is run, the electronic adjusts the program running time according to the intake water temperature and the load size.
Glasscare indicator
The green Glasscare indicator lights during the China & Crystal program. This indicates that a program has been selected which washes glasses especially gently.
At the end of a program
At the end of a program the optical function light flashes slowly with the door closed.
The time display shows "0".
Dishes tends to chip if removed still hot from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open the door slightly. The dishes will cool much faster.
^Unload the dishwasher.
The optical function light goes out one hour after the end of a program.
^Turn the dishwasher off "o".
The dishwasher continues to use electricity until turned off with the "o" button.
^If the dishwasher is not used for a longer period of time, e.g. vacationing, turn off the water supply.
31
