Miele G 1470, G 2470 manual Frequently asked questions, Issue

Frequently asked questions

Issue	Possible fault	Fix
Dishes are not dry,	The rinse aid setting may be	Increase the dosage, refill
glasses and cutlery	too low, or the rinse aid	the reservoir or switch the
are spotted.	reservoir is empty.	rinse aid product when
		refilling, see "Before using
		for the first time".
	Dishes were taken out too	Leave dishes in longer, see
	soon.	"Use".
	A "2 in 1" product was used.	Set the Detergent setting to
	These products have a low	"Powder" and add rinse aid.
	drying effect.
	The Detergent setting "2 in	Set the Detergent setting to
	1" or "Gel" is turned on, but	the detergent used, see
	another product was used.	"Detergent settings".
White residue is	Not enough rinse aid was	Increase the dosage, see
visible on cutlery	used.	"Before using for the first
and dishes.		time".
Clouding occurs on	The salt container is empty.	Refill the salt container, see
glassware and film		"Before using for the first
can be wiped off.		time".
	The salt container lid was	Reseat it making sure it
	not correctly screwed on.	screws back on correctly.
	Unsuitable "2 in 1" or "Gel"	Change detergent, use
	products were used.	normal tabs or normal
		powder detergent.
	The automatic water	Contact Miele’s Technical
	softener unit is defective.	Service.

42