AT&T 882 user manual Case of Difficulty, Problem Solution

	In Case of Difficulty
Problem	Solution
Display Screen Remains	> Check the contrast control switch to make sure the
Blank	contrast is not set too low for the room lighting. See
	page 23.
	> Check AC power connection.
No AC Power	The phone will not work if there is no AC power.
No Dial Tone	> Check that both lines are not on HOLD.
	> Check that the line cord and the coiled handset cord are
	connected properly at both ends.
	> Check for AC power. Is the display on? If not, try
	another AC plug.
	> Unplug the phone and connect it to another working
	modular jack. Plug in AC power. If it still does not
	work, and other phones in your home are working the
	problem may be with this phone. Call 1-800-722-9125.
Call Cannot Be Dialed, Or Is	See page 4 to reset the DIAL MODE switch. If you have
Dialed Slowly	rotary dialing service, you cannot dial phone numbers with
	the switch set to TT (tone). Set the switch to DP (rotary),
	then hang up and dial again.
Difficulty Entering Phone	Review pages 25-32 to make sure you are storing the number
Numbers In Memory	correctly.
Phone Does Not Work	Check the AC connections between the phone and the
	electrical outlet.
Call ID - Local Long	The telephone will not add Ò1Ó and the local area code to
Distance	local long distance numbers. You may not be able to dial
	these numbers from InLog.
“No Line” Appears in	> Check that the line cord is connected properly at
Display	both ends.
	> Unplug the phone and connect it to another working
	modular jack. Plug in AC power. If it still does not
	work, and other phones in your home are working the	6
	problem may be with this phone. Call 1-800-722-9125.
	> Try another phone in this phone jack. If it doesnÕt work,
	there may be a problem with the phone line.
Numbers in a Directory that	Enter a ÒPÓ after the FLASH in the phone number.
Contain a FLASH Cannot be
Dialed

47

AT&T 882 Manual