Call Identification
5
Incoming Call Messages
Message | Meaning |
OUT OF AREA | This message may appear for some long distance calls or calls |
| originating from an area not covered by Call Identification Service. |
| This message may also appear if the caller’s local telephone company |
| uses equipment incompatible with that of your local telephone |
| company. |
|
|
PRIVATE | The phone number or name not available at the |
| caller’s request. |
|
|
CALL ID | Incoming Call Identification was not complete. |
ERROR |
|
|
|
Rep =3 | When someone calls several times from the same phone number, the |
| phone only keeps a record of the most recent call. The phone displays |
| how many times the call was repeated (up to nine times). |
|
|
Call 5 | Position of the call in the Incoming Call Log. |
|
|
Incoming Call Log (InLog)
The Incoming Call Log stores information for up to 64 phone calls. You must subscribe to this service for both lines to receive Incoming Call information about both lines. The most recent call is call #1. For example, if there are 5 calls in memory, call #1 is the most recent call and call #5 is the oldest. If the memory is full, the oldest call is deleted to make room for the new incoming call.
Reviewing InLog
When you begin to review the Incoming Call Log, the most recent calls appear on the display.
The 
and 
buttons are used to move back or forward, one display at a time, to scan the call log.
Reviewing InLog 1 Press the soft key below InLog.
2Use 
to review InLog.
3Press the soft key below Exit when you are done.
40
