AT&T 882 Setting the Clock, Entering Your Home Phone Numbers, Determining Line 1 and Line

Installation

1

3 Setting Up the Phone

When the phone is first plugged into the power plug, the ÒSet-UpÓ menu will appear. You may have to adjust the Display Contrast. (see page 23)

Setting the Clock

1SELECT “Set Clock ” from the Set-Up menu.

2Enter the time then A for AM or P for PM.

3Press .

4Enter the current date.

5Press .

6When you are done press the soft key below Done.

Entering Your Home Phone Numbers

1Highlight “Enter Home Phone Numbers”.

2Press SELECT.

3	Enter your 3 digit area code , then press	.
4	Enter the phone number for Line 1, then press		.
5	Enter the phone number for Line 2, then press		.

6Press the soft key below Done .

Determining Line 1 and Line 2

If you have a two-line jack follow the procedure below to determine which line is Line 1 and Line 2.

•Press LINE 1 and call one of your phone numbers.

If you hear a busy signal, Line 1 is the number

you called. If Line 2 rings, it is the number you called.

One Phone Number Operation

If you have only one telephone number make line choice MANUAL .

1Highlight “Line choice is”.

2Press SELECT to alternate between AUTOMATIC and MANUAL.

3Press the soft key below Done when you are done changing settings.

6

AT&T 882 Manual