Settings J
"3 in 1" tabs
The function "3 in 1" adjusts the program cycle to the use of "3 in 1" detergent products (detergent with rinse aid and water softener salt). The rinse aid dosage and rinse aid refill messages are deactivated. The salt usage for the water softener will be reduced to 1/3
Do not use this extra feature :
–when using "2 in 1" detergents (detergent with rinse aid)
–if your tab water has a water hardness of over 21°.
See also the information from the detergent manufacturer.
The cleaning and drying performance of these detergent products vary.
The detergent selection is set by default to powder detergent.
^Select the desired detergent and confirm with OK.
Water hardness
The dishwasher is equipped with a sensor softener, which automatically detects the hardness of your tap water. After plumbing the dishwasher and finishing a program, e.g. "Rinse + Hold", the water hardness is displayed in the menu "Water hardness".
^Press OK to go back to the "Settings J" menu.
External water softener
If the dishwasher is connected to an external water softener unit which is regenerated with salt, the water hardness must still be set in the dishwasher. Set the dishwasher to the water hardness of your water softener unit.
If you don't know the value, set the dishwasher water hardness to 8°d (8 gr/gal [US]).
^Set the dishwasher to the water hardness of the external water softener and confirm with OK.
If the dishwasher is not longer connected to an external water softener, set the setting to Auto.
41
