Frequently asked questions
Issue | Possible fault | Solution |
Dishes are not dry, | The rinse aid setting may be | Increase the dosage, refill |
glasses and cutlery | too low or the rinse aid | the reservoir or switch the |
are spotted? | reservoir is empty. | rinse aid product when |
|
| refilling, see "Before using |
|
| for the first time". |
| Dishes were taken out too | Leave dishes in longer, see |
| soon. | "Use". |
| "2 in 1" or "3 in 1" products | Set the detergent type to |
| were used. These products | "Powder" and insert rinse |
| have a low drying effect. | aid. See "Settings J - |
|
| Detergent". |
| The detergent "2 in 1" or | Select the detergent setting |
| "3 in 1" is set, but another | to the detergent used. See |
| product was used. | "Settings J - Detergent". |
White residue is | Not enough rinse aid was | Increase the dosage, see |
visible on cutlery | used. | "Before using for the first |
and dishes, |
| time". |
clouding occurs on | The salt container is empty. | Increase the dosage, see |
glassware and film |
| "Before using for the first |
can be wiped off. |
| time". |
| The salt container lid was | Reseat and screw the lid on |
| not screwed on properly. | firmly. |
| Unsuitable "2 in 1" or "3 in 1" | Use a different detergent. |
| products were used. | Try using normal tabs or |
|
| normal powder detergent. |
| The automatic water | Contact Miele Technical |
| softener unit is defective. | Service. |
55
