Settings J
Rinse aid
For best results the rinse aid dosage can be adjusted.
The dosage can be set between 0 and 6 ml.
The dosage set by default to 3 ml of rinse aid per program.
^Use a higher setting if spots appear on dry glassware.
^Use a lower setting if streaking appears on dishes or glasses.
^Select the desired rinse aid amount and confirm with OK.
Filter check h
This selection allows you to set the number of cycles run before the filter check message shows.
You can select between 30 and 60 cycles.
The filter check message is set by default to 40 cycles.
^Select the desired number of cycles and confirm with OK.
See "Cleaning and Care - Triple filter system" for more information.
Adjust Sensor Wash
The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling.
^Select Yes and confirm with OK .
Reorganize program list k
The order of the programs in the program list can be reorganized. The three most frequently used programs can be saved to the first three positions.
CBack A
k1. Normal
2. Pots + Pans | e |
^Select from the first three programs the one, which you would like removed from the top three..
^Confirm with OK.
C Starch | - |
jCheese
Sani Wash | e |
^Select the program to be saved to the position of the previously selected program.
^Confirm with OK.
The reorganizing is confirmed and the new order of programs is shown.
CBack A
k1. Cheese
2. Pots + Pans | e |
^Reorganize another program or switch back to "Settings J" with
Back.
42
