Before using for the first time
Setting the rinse aid dosage
You can adjust the rinse aid dosage to optimize the results.
The rinse aid dosage can be set at levels between 0 and 6 ml. The factory setting is 3 ml of rinse aid. This is just a recommendation.
If the dishes are spotty:
Use a higher setting.
If the dishes are cloudy or streaky:
Use a lower setting.
Press the button to turn the dishwasher off.
Hold down the Program button and simultaneously turn the dishwasher on using the button.
Keep the Program button pressed for at least four seconds until the lower right program indicator lights up.
If it does not come on, start over.
Press the Turbo button three times.
The Turbo indicator light flashes 3 times at short intervals.
The time display shows the flashing sequence p 3.
The set value is shown in the time display after the P.
Select the desired dosage with the Program button.
Every touch of the button increases the level.
The setting is saved immediately.
Press the button to turn the dishwasher off.
13
