Additional options
Buzzer
A buzzer sounds at the end of a program and when a fault occurs.
The buzzer at the end of a program sounds four times in intervals with a short pause.
The fault buzzer sounds four times in an interval without pausing.
The buzzer is activated by default.
It can be turned off so that it does not sound at the end of a program. The buzzer for a fault cannot be turned off.
Open the door.
Press the button to turn the dishwasher off.
Press and hold the Program button and simultaneously turn the dishwasher on using the button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up.
If it does not come on, start over.
Press the Turbo button four times.
The Turbo indicator light shows 4 short flashes in intervals.
The flashing in the time display shows whether the program end buzzer is turned on or off:
–"p 1": buzzer is on
–"p 0": buzzer is off.
Press the Program button if you wish to change the setting.
The setting is immediately saved.
Press the button to turn the dishwasher off.
33
