Before using for the first time
Adjusting the dosage
In order to obtain an optimal cleaning result you can adjust the dosing quantity of the rinse aid.
The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6.
The amount of rinse aid dispensed can be more than the value set due to the automatic adjustment of the "Sensor Wash" program.
–Use a higher setting if spots appear on dry glassware.
Use a lower setting if streaking appears on dishes or glasses.
Turn the dishwasher off "".
Press the "Start / Stop" button and at the same time turn the dishwasher on . Hold the "Start / Stop" button until the "Start / Stop" indicator comes on.
If it does not come on, start over.
Press the "Delay Start" button three times.
The "Delay Start" indicator will flash briefly three times in intervals.
P3 will flash in the display. This means that the rinse aid dosage has been set to 3 ml at the factory.
The dosage set will show in the display after the P.
Select the desired setting with the "Start / Stop" button. Every touch of the button increases the level.
The programmed dosage is saved.
Turn the dishwasher off "".
19
