Additional options
Optimize Standby
A few minutes after a button has been pressed or the end of a program, the dishwasher changes to Standby mode to save energy. The indicator lights and time display will go out, and only the Start/Stop indicator will flash slowly. The dishwasher will not switch to Standby mode while a program is running.
If the dishwasher is not turned off at the end of the program and the door is not opened, it will turn off completely after a few minutes in Standby mode.
The Optimize standby function can be deactivated if desired. The display and the indicator lights will not go out, and the time lapse before the dishwasher turns off will increase to approx. 6 hours, resulting in higher energy consumption.
Press the button to turn the dishwasher off.
Press and hold the "Start/Stop" button and turn the dishwasher on simultaneously using the button. Keep the Start/Stop button pressed for at least four seconds until the "Start/Stop" indicator light comes on.
If it does not come on, start over.
Press the Delay start button eight times.
The "Delay Start" indicator will flash briefly 8 times in intervals.
The flashing sequence in the display shows what the current setting is.
–"P 1": The "Optimize standby" function is activated.
–"P 0": The "Optimize standby" function is deactivated.
Press the "Start/Stop" button if you wish to change the setting.
The setting is saved immediately.
Press the button to turn the dishwasher off.
40
