Manuals / EverFocus / TV and Video / DVR

EverFocus user manual Specifications, EMV400 - 4CH Mobile DVR

Models: EMV400

1 129

Download 129 pages 3.46 Kb

Page 11

1.3 SPECIFICATIONS

	EMV400 - 4CH Mobile DVR

Video Format	NTSC/PAL (auto detected by system)
Operating System	Embedded Linux with special small monitor friendly GUI
Video Input	4 channels (vibration resistant locking Molex connectors – Interface
	cables to BNC-F supplied: two groups of 2 cameras each)
Video Output	Main monitor: 1 composite BNC rear panel / 1 front panel RCA
	output
Video Compression	H.264
Recording Resolutions	NTSC: 720x480/720x240/360x240
	PAL: 720x576/720x288/360x288
Audio Inputs	4 line in (vibration resistant locking Molex connectors - Interface
	cables to RCA-F supplied: two groups of 2 cameras each)

Audio Outputs	1 front panel RCA line out
Alarm Inputs	6 alarm inputs (vibration resistant locking Molex connectors -
	Interface cables supplied)
Alarm Outputs	2 alarm outputs (form “C”; contacts rated at 30V AC/DC @ 1 amp –
	interface cables supplied)

Storage	2.5" HDD x 1(up to 1TB)
Recording Rate	NTSC: D1 60FPS, 2CIF 120f FPS, CIF 240 FPS
	PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS
	Per camera resolutions and record rates can be set individually per
	camera through the OSD menus up to the maximum record
	capacity of 240 NTSC (200 PAL) CIF equivalent FPS
Recording Mode	Continuous recording, event recording, continuous + event
	recording
	(Rate and resolution in each mode set independently per camera)
Record Quality	Adjustable in five levels per camera per Record Mode
Pre Alarm Recording	Optional; 5 second interval
Playback Rate	NTSC: D1 60 FPS, 2CIF 120 FPS, CIF 240 FPS
	PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS

Playback Search	Time/date, event search
Video Loss Detection	Yes
Event Alarm	Fan failure, hard disk temperature, hard disk failure, hard disk full,
	hard disk removed, power loss (after power is restored), network
	loss, GPS loss, GPS speed, GPS fencing, G sensor limits

3

Image 11

EverFocus user manual Specifications, EMV400 - 4CH Mobile DVR

Contents

User Manual EMV400 DVRRelease Date Oct EMV400 DVR Instruction Manual Retain Instructions Safety Precautions Cleaning  Read Instructions Servicing  Power Cord Protection Attachments  Water and MoistureWEEE TABLE OF CONTENTS CONFIGURATIONDVR CONFIGURATION MOUSE OPERATION6 REMOTE OPERATION FROM BROWSER NETWORKING OVERVIEW6.2.2 BROWSER SECURITY SETTINGInstalling ActiveX controls 6.2.1Chapter 1.1 FEATURES1 PRODUCT OVERVIEW Camera Power cable x Video & Audio cable x Alarm cable x 1.2 PACKAGE CONTENTS Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-Operating Screws x 1 pack Antenna x 1 set IR Remote Control x Battery xEMV400 - 4CH Mobile DVR 1.3 SPECIFICATIONSEmbedded 3-axis G Sensor data recorded alarm if separate user Multiple email notifications in response to alarms and eventsRequires real time network connectivity though cellular or WiFi service1.4 FRONT PANEL Record This LED ON indicates Record active Power This LED ON indicates Power onFigure 1-2 Rear Panel 1.5 REAR PANEL4 GPS Data Input Connect this connector to GPS receiver via GPS cable Please refer to the following diagrams for the system connections 1.6 SYSTEM CONNECTIONALARM IN 1.7 REAR PANEL CONNECTORPOWER 12V OUT CAM POWER1CAM POWER2 12V OUTUse the two Z-brackets supplied to mount it in any ways shown 1.8 INSTALLATION OF EMV400Interface Interface Suspend  Show all the possible ways to mount the DVR Equipment Required Quick Installation Guide  Unpack EverythingPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.10 AUDIO INSTALLATION 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION1.11ALARM CONTACTS INSTALLATION 1.13 NETWORK CONNECTION 1.12 USB-Mouse installation1.11.1 Alarm Input Contacts 1.11.2 Alarm Output RelayFigure 1-4 Network Connection through Patch Cable 1.13.1 Direct PC Connection through Crossover Network Cable1.13.2 Network Connection through Patch Cable Figure 1-3 Direct PC ConnectionPinout of straight patch cable 1.14 FINAL INSTALL PROCESS2.1.2 OSD Root Menu 2.1.1 How to select a channel2 MOUSE OPERATION 2.1 GENERAL USB MOUSE OPERATION2.1.3 Field Input Options Chapter 3 CONFIGURATION3.1 CONFIGURATION OF DVR 3.2 LOGINFigure 3-2 On-screen Keyboard 3.3 On Screen Configuration MenuFigure 3-3 On-screen Configuration Playback Bar 3.4.1 Time Search 3.4 SEARCH3.4.2 G Sensor Search Figure 3-6 Search Menu - GPS Search 3.4.3 GPS Speed SearchFigure 3-7 Search Menu - GPS Bordering Search button to return to the previous level of menuFigure 3-8 Search Menu - Event Search 3.4.4 Event SearchClick button to enter G Sensor search menu Prev Page Go to previous page Next Page Go to next pagePlay Playback selected item Delete Delete selected item Click button to return to the previous level of menuFigure 3-10 Archive Menu 3.5 ARCHIVE USBChapter 4 DVR CONFIGURATION4.1 Configuration Menu Figure 4-2 Configuration Menu 4.2.1 Normal 4.2 CAMERA SETTINGFigure 4-5 Camera Settings-Video Loss 4.2.2 Video AdjustSpeed 4.2.3 Alarm4.3.1 Record 4.3 RECORD SETTING4.4.1 Alarm-Alarm Settings 4.4 ALARM/GPSBuzzer Check this box to enable the buzzer when an alarm occurs Alarm Select the alarm input trigger connection number from 1 toEnable Check box to enable response to that alarm trigger Transparent Alarm output remains as long as the alarm input is activeFigure 4-10 Alarm - Event Settings 4.4.2 Alarm-Event SettingsFigure 4-11 Alarm - Event - Fan Failure Fan FailureFigure 4-12 Alarm - Event - HD Temperature HD TemperatureFigure 4-13 Alarm - Event - HD Failure HD FailureFigure 4-14 Alarm - Event - HD Full HD FullFigure 4-15 Alarm - Event - HD Off HD OffFigure 4-16 Alarm - Event - Power Loss Power LossFigure 4-17 Alarm - Event - Network Loss Network LossFigure 4-18 Alarm - Event - GPS Loss GPS LossFigure 4-19 Alarm - Video Loss 4.4.3 Alarm - Video LossPage Figure 4-20 Alarm - G-Sensor 4.4.4 Alarm-G-Sensor SettingsFigure 4-21 Alarm - GPS Speed 4.4.5 Alarm-GPS SpeedFigure 4-22 Alarm - GPS Event Action 4.4.6 Alarm-GPS Event ActionFigure 4-23 Alarm - GPS Fencing 4.4.7 Alarm-GPS Fencing4.5.1 Date/Time Settings 4.5 Date/Time SettingFigure 4-25 Date/Time Settings-Daylight Saving 4.5.2 Daylight Saving4.6.2 Monitor On Screen Display 4.6 Display4.6.1 Title Main Monitor Main Monitor 4.6.3 LayoutClick button to set up Layout parameters 4 Up Type Layout type for the display switchFigure 4-29 Display-Sequence 4.6.4 Sequence4.7.1 LAN Settings 4.7 NETWORK SETTINGNetwork Type Click button to start LAN reconnection The default port for the EMV400 isWell Known Ports 0 thru Registered Ports 1024 thru Dynamic and/or Private Ports 49152 thruFigure 4-32 Network Menu - Wireless 4.7.2 Wireless SettingsAPN Access Point Name By local ISP setting 4.7.3 Mobile Connection SettingsNOTE For more reliable email service, use the server’s IP address 4.7.4 Email Settingscharacters particularly ~ ! @ # $ % & * + 4.7.5 DDNS SettingsEverfocusDDNS Click button to return to the previous level of menu Password Password of the dyndns accountHost name Host name created through the dyndns account User name User name of the dyndns accountFigure 4-37 Network Menu - Alarm Server 4.7.6 Alarm Server Settings4.8.1 User 4.8 SYSTEMFigure 4-41 System-User-Edit EditFigure 4-40 System-User-Add Local LocalRS232 4.8.2 I/O ControlEverfocus. NOTE all cameras on the bus must use the same protocol RS485Control Figure 4-43 System-I/O Control-GPS ControlDisk Info 4.8.3 DISK InfoLog Type 4.8.4 LOGFrom Next Page Go to the next page of log Close Close the window Clear Log Press button to clear the logExport Log to USB Press button to export log data to USB Prev Page Go to the previous page of logFigure 4-48 System-Settings 4.8.5 SETTINGSFirmware 4.8.6 SERVICEConfigurations Status Network Select network type from LAN, Wireless and Mobile4.9 INFORMATION System5.3 Gateway Address 5 Networking Overview5.1 Introduction to TCP/IP 5.2 Subnet Masks5.4 Virtual Ports 5.5 Pre-Installation5.6 What is your Network Setup? Crossover Ethernet Cable Pin outs 5.7 Simple One to One ConnectionConnection Procedure Page Page  Restart both the computer and the DVR  Click on the option that says “Use the following IP address”Connection Procedure 5.8 Direct High Speed Modem ConnectionStraight Through Ethernet Cable Pin outs  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Straight Through Ethernet Cable Pin outs 5.9 Router or LAN ConnectionConnection Procedure  Type “command” and click on OK  Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an address o If using Windows Vista, choose Search insteadTo set DVR for Internet Connection through router Chapter 6.1 CONNECTING TO EMV4006 REMOTE OPERATION FROM BROWSER 6.2.1 Installing ActiveX controls 6.2 BROWSER SECURITY SETTINGPage Now, you will be able to see the remote live page Install the MSXML file when prompted to do soRight click on the yellow bar and select “Run Add-on…” 6.2.2 Enabling ActiveX Controls “Prompt” “Enable”Click the Refresh button to reload the page Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Default password6.3 REMOTE LIVE VIEW 5. In the main page, you will see live images in a 4-screen display Alarm/Event Setup Date/Time Setup Display Setup Network SetupSystem Setup Information Setup Copy Menu Search Menu Play Reverse the video 6.4 REMOTE PLAYBACKPlayback Control Keys Fast rewind the videoChapter 7 EVERFOCUS DDNS SETUPStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com Chapter 8 LINKSYS & D-LINK PORT FORWARDING8.1 TYPICAL LINKSYS PORT FORWARDING Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule  There is no display coming from one of the channels on the DVR 9 TROUBLESHOOTING The DVR will not go into record mode  The DVR displays nothing on the main monitorPage Appendix APPENDIX A TIMING OF ALARM MODESt Duration = t Reaction Alarm Reset Input Event Alarm Durationt Event Timeout Mode Retrigger of Alarms APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULES CaseRecord Mode Normal + Event Record With Recording daysPreset Setting Option Record With Preset SettingCase Record Mode Normal + Event or Event Only Appendix APPENDIX C REMOTE CONTROLJapan Office Headquarter OfficeBeijing office European Office