Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 user manual Record Setting

Models: EMV400

1 129

Download 129 pages 3.46 Kb

Page 46

4.3 RECORD SETTING

4.3 RECORD SETTING

Figure 4- is a screenshot of the RECORD SETTING MENU. This menu is used to configure basic recording settings.

Figure 4-7 Record Settings

4.3.1 Record

Record Overwrite: Check the box and the disk will begin overwriting when full. NOTE: Unless this box is checked, THE DVR MUST STOP RECORDING WHEN THE DISK IS FULL. The use of record overwrite is strongly recommended. If you do not use this feature, please be sure to make specific arrangements to monitor/be notified when the disk is full.

Power Delay-On:Set the delay time to supply power to the DVR in order to avoid excess consumption at ignition.

Power Delay-Off:Set the delay time to power off the DVR after ignition off. It can extend the recording time after ignition off.

Time Stamp: Select if the time and date will display while recording. Choose the location for the time display from Top, Bottom or Off.

Auto Erase Video: The hard drive will automatically erase video after it has been on the hard drive for the selected number of days. To use the maximum hard drive space, choose “OFF”. (See Record Overwrite and notes above.) This feature is useful if local rules and regulations require recorded video to be discarded after a specific number of days, or to limit the retention of older recorded video to clear space in anticipation of event recording.

Click button to return to the previous level of menu.

38

Image 46

EverFocus EMV400 user manual Record Setting

Contents

EMV400 DVR User ManualEMV400 DVR Instruction Manual Release Date Oct Read Instructions Safety Precautions Cleaning  Retain Instructions Water and Moisture  Power Cord Protection Attachments  ServicingWEEE MOUSE OPERATION CONFIGURATIONDVR CONFIGURATION TABLE OF CONTENTSNETWORKING OVERVIEW 6 REMOTE OPERATION FROM BROWSER6.2.1 BROWSER SECURITY SETTINGInstalling ActiveX controls 6.2.21 PRODUCT OVERVIEW 1.1 FEATURESChapter Screws x 1 pack Antenna x 1 set IR Remote Control x Battery x 1.2 PACKAGE CONTENTS Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-Operating Camera Power cable x Video & Audio cable x Alarm cable x1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVRservice Multiple email notifications in response to alarms and eventsRequires real time network connectivity though cellular or WiFi Embedded 3-axis G Sensor data recorded alarm if separate user1.4 FRONT PANEL Power This LED ON indicates Power on Record This LED ON indicates Record active1.5 REAR PANEL Figure 1-2 Rear Panel4 GPS Data Input Connect this connector to GPS receiver via GPS cable 1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connectionsPOWER 1.7 REAR PANEL CONNECTORALARM IN 12V OUT CAM POWER1CAM POWER2 12V OUTSuspend  Show all the possible ways to mount the DVR 1.8 INSTALLATION OF EMV400Interface Interface Use the two Z-brackets supplied to mount it in any ways shownQuick Installation Guide  Unpack Everything  Equipment RequiredPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.11ALARM CONTACTS INSTALLATION 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION1.10 AUDIO INSTALLATION 1.11.2 Alarm Output Relay 1.12 USB-Mouse installation1.11.1 Alarm Input Contacts 1.13 NETWORK CONNECTIONFigure 1-3 Direct PC Connection 1.13.1 Direct PC Connection through Crossover Network Cable1.13.2 Network Connection through Patch Cable Figure 1-4 Network Connection through Patch Cable1.14 FINAL INSTALL PROCESS Pinout of straight patch cable2.1 GENERAL USB MOUSE OPERATION 2.1.1 How to select a channel2 MOUSE OPERATION 2.1.2 OSD Root Menu2.1.3 Field Input Options 3.2 LOGIN 3 CONFIGURATION3.1 CONFIGURATION OF DVR ChapterFigure 3-3 On-screen Configuration 3.3 On Screen Configuration MenuFigure 3-2 On-screen Keyboard Playback Bar 3.4 SEARCH 3.4.1 Time Search3.4.2 G Sensor Search 3.4.3 GPS Speed Search Figure 3-6 Search Menu - GPS Searchbutton to return to the previous level of menu Figure 3-7 Search Menu - GPS Bordering Search3.4.4 Event Search Figure 3-8 Search Menu - Event SearchClick button to return to the previous level of menu Prev Page Go to previous page Next Page Go to next pagePlay Playback selected item Delete Delete selected item Click button to enter G Sensor search menu3.5 ARCHIVE USB Figure 3-10 Archive Menu4.1 Configuration Menu 4 DVR CONFIGURATIONChapter Figure 4-2 Configuration Menu 4.2 CAMERA SETTING 4.2.1 Normal4.2.2 Video Adjust Figure 4-5 Camera Settings-Video Loss4.2.3 Alarm Speed4.3 RECORD SETTING 4.3.1 Record4.4 ALARM/GPS 4.4.1 Alarm-Alarm SettingsTransparent Alarm output remains as long as the alarm input is active Alarm Select the alarm input trigger connection number from 1 toEnable Check box to enable response to that alarm trigger Buzzer Check this box to enable the buzzer when an alarm occurs4.4.2 Alarm-Event Settings Figure 4-10 Alarm - Event SettingsFan Failure Figure 4-11 Alarm - Event - Fan FailureHD Temperature Figure 4-12 Alarm - Event - HD TemperatureHD Failure Figure 4-13 Alarm - Event - HD FailureHD Full Figure 4-14 Alarm - Event - HD FullHD Off Figure 4-15 Alarm - Event - HD OffPower Loss Figure 4-16 Alarm - Event - Power LossNetwork Loss Figure 4-17 Alarm - Event - Network LossGPS Loss Figure 4-18 Alarm - Event - GPS Loss4.4.3 Alarm - Video Loss Figure 4-19 Alarm - Video LossPage 4.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm - G-Sensor4.4.5 Alarm-GPS Speed Figure 4-21 Alarm - GPS Speed4.4.6 Alarm-GPS Event Action Figure 4-22 Alarm - GPS Event Action4.4.7 Alarm-GPS Fencing Figure 4-23 Alarm - GPS Fencing4.5 Date/Time Setting 4.5.1 Date/Time Settings4.5.2 Daylight Saving Figure 4-25 Date/Time Settings-Daylight Saving4.6.1 Title 4.6 Display4.6.2 Monitor On Screen Display Main Monitor 4 Up Type Layout type for the display switch 4.6.3 LayoutClick button to set up Layout parameters Main Monitor4.6.4 Sequence Figure 4-29 Display-Sequence4.7 NETWORK SETTING 4.7.1 LAN SettingsNetwork Type Dynamic and/or Private Ports 49152 thru The default port for the EMV400 isWell Known Ports 0 thru Registered Ports 1024 thru Click button to start LAN reconnection4.7.2 Wireless Settings Figure 4-32 Network Menu - Wireless4.7.3 Mobile Connection Settings APN Access Point Name By local ISP setting4.7.4 Email Settings NOTE For more reliable email service, use the server’s IP addressEverfocusDDNS 4.7.5 DDNS Settingscharacters particularly ~ ! @ # $ % & * + User name User name of the dyndns account Password Password of the dyndns accountHost name Host name created through the dyndns account Click button to return to the previous level of menu4.7.6 Alarm Server Settings Figure 4-37 Network Menu - Alarm Server4.8 SYSTEM 4.8.1 UserFigure 4-40 System-User-Add EditFigure 4-41 System-User-Edit Local Local4.8.2 I/O Control RS232Control RS485Everfocus. NOTE all cameras on the bus must use the same protocol Control Figure 4-43 System-I/O Control-GPS4.8.3 DISK Info Disk InfoFrom 4.8.4 LOGLog Type Prev Page Go to the previous page of log Clear Log Press button to clear the logExport Log to USB Press button to export log data to USB Next Page Go to the next page of log Close Close the window4.8.5 SETTINGS Figure 4-48 System-SettingsConfigurations 4.8.6 SERVICEFirmware System Network Select network type from LAN, Wireless and Mobile4.9 INFORMATION Status5.2 Subnet Masks 5 Networking Overview5.1 Introduction to TCP/IP 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page  Click on the option that says “Use the following IP address”  Restart both the computer and the DVRStraight Through Ethernet Cable Pin outs 5.8 Direct High Speed Modem ConnectionConnection Procedure  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Connection Procedure 5.9 Router or LAN ConnectionStraight Through Ethernet Cable Pin outs o If using Windows Vista, choose Search instead  Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an address  Type “command” and click on OKTo set DVR for Internet Connection through router 6 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO EMV400Chapter 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsPage Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do soNow, you will be able to see the remote live page 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Default password Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW System Setup Information Setup Copy Menu Search Menu Alarm/Event Setup Date/Time Setup Display Setup Network Setup5. In the main page, you will see live images in a 4-screen display Fast rewind the video 6.4 REMOTE PLAYBACKPlayback Control Keys Play Reverse the video7 EVERFOCUS DDNS SETUP ChapterStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com 8.1 TYPICAL LINKSYS PORT FORWARDING 8 LINKSYS & D-LINK PORT FORWARDINGChapter Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule  The DVR displays nothing on the main monitor 9 TROUBLESHOOTING The DVR will not go into record mode  There is no display coming from one of the channels on the DVRPage APPENDIX A TIMING OF ALARM MODES Appendixt Event Alarm Reset Input Event Alarm Durationt Duration = t Reaction Timeout Mode Retrigger of Alarms Record With Recording days CaseRecord Mode Normal + Event APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESCase Record Mode Normal + Event or Event Only Record With Preset SettingPreset Setting Option APPENDIX C REMOTE CONTROL AppendixEuropean Office Headquarter OfficeBeijing office Japan Office