Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 Mobile Connection Settings, APN Access Point Name By local ISP setting

Models: EMV400

1 129

Download 129 pages 3.46 Kb

Page 74

Image 74

4.7.3 Mobile Connection Settings

Figure 4-33 Network Menu – Mobile Connection

GPRS Service: Select “On” to enable GPRS service. Select “Off” to disable GPRS function.

APN (Access Point Name): By local ISP setting.

Phone Number: Input the phone number to dial for mobile connection.

User Name: Input the user name required for mobile connection.

Password: Input the password required for mobile connection.

IP Address: The IP address provided by ISP will be displayed.

Subnet Mask: The Subnet Mask provided by ISP will be displayed.

Gateway: The gateway provided by ISP will be displayed.

DNS Server 1: The primary DNS server provided by ISP will be displayed.

DNS Server 2: The secondary DNS server provided by ISP will be displayed.

Click button to stop mobile connection.

Click button to start mobile connection.

Click button to return to the previous level of menu.

Page 74

Image 74

EverFocus EMV400 user manual Mobile Connection Settings, APN Access Point Name By local ISP setting

Contents

EMV400 DVR User ManualEMV400 DVR Instruction Manual Release Date Oct Read Instructions Safety Precautions Cleaning  Retain Instructions Water and Moisture  Power Cord Protection Attachments  ServicingWEEE MOUSE OPERATION CONFIGURATIONDVR CONFIGURATION TABLE OF CONTENTSNETWORKING OVERVIEW 6 REMOTE OPERATION FROM BROWSER6.2.1 BROWSER SECURITY SETTINGInstalling ActiveX controls 6.2.2Chapter 1.1 FEATURES1 PRODUCT OVERVIEW Screws x 1 pack Antenna x 1 set IR Remote Control x Battery x 1.2 PACKAGE CONTENTS Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-Operating Camera Power cable x Video & Audio cable x Alarm cable x1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVRservice Multiple email notifications in response to alarms and eventsRequires real time network connectivity though cellular or WiFi Embedded 3-axis G Sensor data recorded alarm if separate user1.4 FRONT PANEL Power This LED ON indicates Power on Record This LED ON indicates Record active1.5 REAR PANEL Figure 1-2 Rear Panel4 GPS Data Input Connect this connector to GPS receiver via GPS cable 1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connectionsALARM IN 1.7 REAR PANEL CONNECTORPOWER 12V OUT CAM POWER1CAM POWER2 12V OUTSuspend  Show all the possible ways to mount the DVR 1.8 INSTALLATION OF EMV400Interface Interface Use the two Z-brackets supplied to mount it in any ways shownQuick Installation Guide  Unpack Everything  Equipment RequiredPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.10 AUDIO INSTALLATION 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION1.11ALARM CONTACTS INSTALLATION 1.11.2 Alarm Output Relay 1.12 USB-Mouse installation1.11.1 Alarm Input Contacts 1.13 NETWORK CONNECTIONFigure 1-3 Direct PC Connection 1.13.1 Direct PC Connection through Crossover Network Cable1.13.2 Network Connection through Patch Cable Figure 1-4 Network Connection through Patch Cable1.14 FINAL INSTALL PROCESS Pinout of straight patch cable2.1 GENERAL USB MOUSE OPERATION 2.1.1 How to select a channel2 MOUSE OPERATION 2.1.2 OSD Root Menu2.1.3 Field Input Options 3.2 LOGIN 3 CONFIGURATION3.1 CONFIGURATION OF DVR ChapterFigure 3-2 On-screen Keyboard 3.3 On Screen Configuration MenuFigure 3-3 On-screen Configuration Playback Bar 3.4 SEARCH 3.4.1 Time Search3.4.2 G Sensor Search 3.4.3 GPS Speed Search Figure 3-6 Search Menu - GPS Searchbutton to return to the previous level of menu Figure 3-7 Search Menu - GPS Bordering Search3.4.4 Event Search Figure 3-8 Search Menu - Event SearchClick button to return to the previous level of menu Prev Page Go to previous page Next Page Go to next pagePlay Playback selected item Delete Delete selected item Click button to enter G Sensor search menu3.5 ARCHIVE USB Figure 3-10 Archive MenuChapter 4 DVR CONFIGURATION4.1 Configuration Menu Figure 4-2 Configuration Menu 4.2 CAMERA SETTING 4.2.1 Normal4.2.2 Video Adjust Figure 4-5 Camera Settings-Video Loss4.2.3 Alarm Speed4.3 RECORD SETTING 4.3.1 Record4.4 ALARM/GPS 4.4.1 Alarm-Alarm SettingsTransparent Alarm output remains as long as the alarm input is active Alarm Select the alarm input trigger connection number from 1 toEnable Check box to enable response to that alarm trigger Buzzer Check this box to enable the buzzer when an alarm occurs4.4.2 Alarm-Event Settings Figure 4-10 Alarm - Event SettingsFan Failure Figure 4-11 Alarm - Event - Fan FailureHD Temperature Figure 4-12 Alarm - Event - HD TemperatureHD Failure Figure 4-13 Alarm - Event - HD FailureHD Full Figure 4-14 Alarm - Event - HD FullHD Off Figure 4-15 Alarm - Event - HD OffPower Loss Figure 4-16 Alarm - Event - Power LossNetwork Loss Figure 4-17 Alarm - Event - Network LossGPS Loss Figure 4-18 Alarm - Event - GPS Loss4.4.3 Alarm - Video Loss Figure 4-19 Alarm - Video LossPage 4.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm - G-Sensor4.4.5 Alarm-GPS Speed Figure 4-21 Alarm - GPS Speed4.4.6 Alarm-GPS Event Action Figure 4-22 Alarm - GPS Event Action4.4.7 Alarm-GPS Fencing Figure 4-23 Alarm - GPS Fencing4.5 Date/Time Setting 4.5.1 Date/Time Settings4.5.2 Daylight Saving Figure 4-25 Date/Time Settings-Daylight Saving4.6.2 Monitor On Screen Display 4.6 Display4.6.1 Title Main Monitor 4 Up Type Layout type for the display switch 4.6.3 LayoutClick button to set up Layout parameters Main Monitor4.6.4 Sequence Figure 4-29 Display-Sequence4.7 NETWORK SETTING 4.7.1 LAN SettingsNetwork Type Dynamic and/or Private Ports 49152 thru The default port for the EMV400 isWell Known Ports 0 thru Registered Ports 1024 thru Click button to start LAN reconnection4.7.2 Wireless Settings Figure 4-32 Network Menu - Wireless4.7.3 Mobile Connection Settings APN Access Point Name By local ISP setting4.7.4 Email Settings NOTE For more reliable email service, use the server’s IP addresscharacters particularly ~ ! @ # $ % & * + 4.7.5 DDNS SettingsEverfocusDDNS User name User name of the dyndns account Password Password of the dyndns accountHost name Host name created through the dyndns account Click button to return to the previous level of menu4.7.6 Alarm Server Settings Figure 4-37 Network Menu - Alarm Server4.8 SYSTEM 4.8.1 UserFigure 4-41 System-User-Edit EditFigure 4-40 System-User-Add Local Local4.8.2 I/O Control RS232Everfocus. NOTE all cameras on the bus must use the same protocol RS485Control Control Figure 4-43 System-I/O Control-GPS4.8.3 DISK Info Disk InfoLog Type 4.8.4 LOGFrom Prev Page Go to the previous page of log Clear Log Press button to clear the logExport Log to USB Press button to export log data to USB Next Page Go to the next page of log Close Close the window4.8.5 SETTINGS Figure 4-48 System-SettingsFirmware 4.8.6 SERVICEConfigurations System Network Select network type from LAN, Wireless and Mobile4.9 INFORMATION Status5.2 Subnet Masks 5 Networking Overview5.1 Introduction to TCP/IP 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page  Click on the option that says “Use the following IP address”  Restart both the computer and the DVRConnection Procedure 5.8 Direct High Speed Modem ConnectionStraight Through Ethernet Cable Pin outs  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Straight Through Ethernet Cable Pin outs 5.9 Router or LAN ConnectionConnection Procedure o If using Windows Vista, choose Search instead  Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an address  Type “command” and click on OKTo set DVR for Internet Connection through router Chapter 6.1 CONNECTING TO EMV4006 REMOTE OPERATION FROM BROWSER 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsPage Now, you will be able to see the remote live page Install the MSXML file when prompted to do soRight click on the yellow bar and select “Run Add-on…” 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Default password Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW 5. In the main page, you will see live images in a 4-screen display Alarm/Event Setup Date/Time Setup Display Setup Network SetupSystem Setup Information Setup Copy Menu Search Menu Fast rewind the video 6.4 REMOTE PLAYBACKPlayback Control Keys Play Reverse the video7 EVERFOCUS DDNS SETUP ChapterStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com Chapter 8 LINKSYS & D-LINK PORT FORWARDING8.1 TYPICAL LINKSYS PORT FORWARDING Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule  The DVR displays nothing on the main monitor 9 TROUBLESHOOTING The DVR will not go into record mode  There is no display coming from one of the channels on the DVRPage APPENDIX A TIMING OF ALARM MODES Appendixt Duration = t Reaction Alarm Reset Input Event Alarm Durationt Event Timeout Mode Retrigger of Alarms Record With Recording days CaseRecord Mode Normal + Event APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESPreset Setting Option Record With Preset SettingCase Record Mode Normal + Event or Event Only APPENDIX C REMOTE CONTROL AppendixEuropean Office Headquarter OfficeBeijing office Japan Office