Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 user manual Information, System, Status

Models: EMV400

1 129

Download 129 pages 3.46 Kb

Page 90

Image 90

4.9 INFORMATION

Figure 4.50 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information.

Figure 4-50 Information

System

Version: Displays firmware version number.

Model: Displays DVR model number.

NTSC/PAL: Displays current video format selected based video format on Camera 1 input at boot up.

Status

Disk: Displays status of the installed disk(s); normal disk operation is indicated by “OK”.

Fans: Displays fan status; normal fan operation is indicated by “OK”.

Network (Select network type from LAN, Wireless and Mobile)

IP Address: Displays the DVR’s current IP Address as set in the Network or Express Setup screen.

MAC: Unique address of the DVR’s internal network card. This option cannot be changed.

DVR Name: Displays DVR DDNS name if configured.

Network ID: The ID number for the alarm network as set in the Alarm Server screen.

Click button to return to the previous level of menu.

Page 90

Image 90

EverFocus EMV400 user manual Information, System, Status, Network Select network type from LAN, Wireless and Mobile

Contents

EMV400 DVR User ManualEMV400 DVR Instruction Manual Release Date Oct Read Instructions Safety Precautions Cleaning  Retain Instructions Water and Moisture  Power Cord Protection Attachments  ServicingWEEE MOUSE OPERATION CONFIGURATIONDVR CONFIGURATION TABLE OF CONTENTSNETWORKING OVERVIEW 6 REMOTE OPERATION FROM BROWSER6.2.1 BROWSER SECURITY SETTINGInstalling ActiveX controls 6.2.21.1 FEATURES 1 PRODUCT OVERVIEWChapter Screws x 1 pack Antenna x 1 set IR Remote Control x Battery x 1.2 PACKAGE CONTENTS Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-Operating Camera Power cable x Video & Audio cable x Alarm cable x1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVRservice Multiple email notifications in response to alarms and eventsRequires real time network connectivity though cellular or WiFi Embedded 3-axis G Sensor data recorded alarm if separate user1.4 FRONT PANEL Power This LED ON indicates Power on Record This LED ON indicates Record active1.5 REAR PANEL Figure 1-2 Rear Panel4 GPS Data Input Connect this connector to GPS receiver via GPS cable 1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connections1.7 REAR PANEL CONNECTOR POWERALARM IN 12V OUT CAM POWER1CAM POWER2 12V OUTSuspend  Show all the possible ways to mount the DVR 1.8 INSTALLATION OF EMV400Interface Interface Use the two Z-brackets supplied to mount it in any ways shownQuick Installation Guide  Unpack Everything  Equipment RequiredPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION 1.11ALARM CONTACTS INSTALLATION1.10 AUDIO INSTALLATION 1.11.2 Alarm Output Relay 1.12 USB-Mouse installation1.11.1 Alarm Input Contacts 1.13 NETWORK CONNECTIONFigure 1-3 Direct PC Connection 1.13.1 Direct PC Connection through Crossover Network Cable1.13.2 Network Connection through Patch Cable Figure 1-4 Network Connection through Patch Cable1.14 FINAL INSTALL PROCESS Pinout of straight patch cable2.1 GENERAL USB MOUSE OPERATION 2.1.1 How to select a channel2 MOUSE OPERATION 2.1.2 OSD Root Menu2.1.3 Field Input Options 3.2 LOGIN 3 CONFIGURATION3.1 CONFIGURATION OF DVR Chapter3.3 On Screen Configuration Menu Figure 3-3 On-screen ConfigurationFigure 3-2 On-screen Keyboard Playback Bar 3.4 SEARCH 3.4.1 Time Search3.4.2 G Sensor Search 3.4.3 GPS Speed Search Figure 3-6 Search Menu - GPS Searchbutton to return to the previous level of menu Figure 3-7 Search Menu - GPS Bordering Search3.4.4 Event Search Figure 3-8 Search Menu - Event SearchClick button to return to the previous level of menu Prev Page Go to previous page Next Page Go to next pagePlay Playback selected item Delete Delete selected item Click button to enter G Sensor search menu3.5 ARCHIVE USB Figure 3-10 Archive Menu4 DVR CONFIGURATION 4.1 Configuration MenuChapter Figure 4-2 Configuration Menu 4.2 CAMERA SETTING 4.2.1 Normal4.2.2 Video Adjust Figure 4-5 Camera Settings-Video Loss4.2.3 Alarm Speed4.3 RECORD SETTING 4.3.1 Record4.4 ALARM/GPS 4.4.1 Alarm-Alarm SettingsTransparent Alarm output remains as long as the alarm input is active Alarm Select the alarm input trigger connection number from 1 toEnable Check box to enable response to that alarm trigger Buzzer Check this box to enable the buzzer when an alarm occurs4.4.2 Alarm-Event Settings Figure 4-10 Alarm - Event SettingsFan Failure Figure 4-11 Alarm - Event - Fan FailureHD Temperature Figure 4-12 Alarm - Event - HD TemperatureHD Failure Figure 4-13 Alarm - Event - HD FailureHD Full Figure 4-14 Alarm - Event - HD FullHD Off Figure 4-15 Alarm - Event - HD OffPower Loss Figure 4-16 Alarm - Event - Power LossNetwork Loss Figure 4-17 Alarm - Event - Network LossGPS Loss Figure 4-18 Alarm - Event - GPS Loss4.4.3 Alarm - Video Loss Figure 4-19 Alarm - Video LossPage 4.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm - G-Sensor4.4.5 Alarm-GPS Speed Figure 4-21 Alarm - GPS Speed4.4.6 Alarm-GPS Event Action Figure 4-22 Alarm - GPS Event Action4.4.7 Alarm-GPS Fencing Figure 4-23 Alarm - GPS Fencing4.5 Date/Time Setting 4.5.1 Date/Time Settings4.5.2 Daylight Saving Figure 4-25 Date/Time Settings-Daylight Saving4.6 Display 4.6.1 Title4.6.2 Monitor On Screen Display Main Monitor 4 Up Type Layout type for the display switch 4.6.3 LayoutClick button to set up Layout parameters Main Monitor4.6.4 Sequence Figure 4-29 Display-Sequence4.7 NETWORK SETTING 4.7.1 LAN SettingsNetwork Type Dynamic and/or Private Ports 49152 thru The default port for the EMV400 isWell Known Ports 0 thru Registered Ports 1024 thru Click button to start LAN reconnection4.7.2 Wireless Settings Figure 4-32 Network Menu - Wireless4.7.3 Mobile Connection Settings APN Access Point Name By local ISP setting4.7.4 Email Settings NOTE For more reliable email service, use the server’s IP address4.7.5 DDNS Settings EverfocusDDNScharacters particularly ~ ! @ # $ % & * + User name User name of the dyndns account Password Password of the dyndns accountHost name Host name created through the dyndns account Click button to return to the previous level of menu4.7.6 Alarm Server Settings Figure 4-37 Network Menu - Alarm Server4.8 SYSTEM 4.8.1 UserEdit Figure 4-40 System-User-AddFigure 4-41 System-User-Edit Local Local4.8.2 I/O Control RS232RS485 ControlEverfocus. NOTE all cameras on the bus must use the same protocol Control Figure 4-43 System-I/O Control-GPS4.8.3 DISK Info Disk Info4.8.4 LOG FromLog Type Prev Page Go to the previous page of log Clear Log Press button to clear the logExport Log to USB Press button to export log data to USB Next Page Go to the next page of log Close Close the window4.8.5 SETTINGS Figure 4-48 System-Settings4.8.6 SERVICE ConfigurationsFirmware System Network Select network type from LAN, Wireless and Mobile4.9 INFORMATION Status5.2 Subnet Masks 5 Networking Overview5.1 Introduction to TCP/IP 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page  Click on the option that says “Use the following IP address”  Restart both the computer and the DVR5.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outsConnection Procedure  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address 5.9 Router or LAN Connection Connection ProcedureStraight Through Ethernet Cable Pin outs o If using Windows Vista, choose Search instead  Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an address  Type “command” and click on OKTo set DVR for Internet Connection through router 6.1 CONNECTING TO EMV400 6 REMOTE OPERATION FROM BROWSERChapter 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsPage Install the MSXML file when prompted to do so Right click on the yellow bar and select “Run Add-on…”Now, you will be able to see the remote live page 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Default password Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW Alarm/Event Setup Date/Time Setup Display Setup Network Setup System Setup Information Setup Copy Menu Search Menu5. In the main page, you will see live images in a 4-screen display Fast rewind the video 6.4 REMOTE PLAYBACKPlayback Control Keys Play Reverse the video7 EVERFOCUS DDNS SETUP ChapterStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com 8 LINKSYS & D-LINK PORT FORWARDING 8.1 TYPICAL LINKSYS PORT FORWARDINGChapter Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule  The DVR displays nothing on the main monitor 9 TROUBLESHOOTING The DVR will not go into record mode  There is no display coming from one of the channels on the DVRPage APPENDIX A TIMING OF ALARM MODES AppendixAlarm Reset Input Event Alarm Duration t Eventt Duration = t Reaction Timeout Mode Retrigger of Alarms Record With Recording days CaseRecord Mode Normal + Event APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESRecord With Preset Setting Case Record Mode Normal + Event or Event OnlyPreset Setting Option APPENDIX C REMOTE CONTROL AppendixEuropean Office Headquarter OfficeBeijing office Japan Office