Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 user manual Configuration Of Dvr, Login, Chapter

Models: EMV400

1 129

Download 129 pages 3.46 Kb

Page 31

3 CONFIGURATION

Chapter

3

3 CONFIGURATION

This chapter provides information for configuring EMV400.

3.1 CONFIGURATION OF DVR

EMV400 can be configured through On Screen Display Playback and Configuration

Connect to the “Main Mon” output with a monitor and use the mouse or the remote control to configure menu settings.

3.2 LOGIN

In order to access EMV400 options, users may be asked to log in for authority identification. To log in, follow these steps.

1.Right click on the screen to display the Main Menu

2.The following screen pops up:

Figure 3-1 Login page

3.Select the user name from the drop-down list and input the password. The defaults are: User name: admin (lower case)

Password: 11111111

To input password: click the password field to bring up the on-screen keyboard (see Figure 3-2On-screen Keyboard). Click on each button to input the desired characters for the password. When finished, click

“” on the on-screen keyboard to confirm the password. + Click on the “Login” button to log in to the system.

23

Image 31

EverFocus EMV400 user manual Configuration Of Dvr, Login, Chapter

Contents

User Manual EMV400 DVRRelease Date Oct EMV400 DVR Instruction Manual Retain Instructions Safety Precautions Cleaning  Read Instructions Servicing  Power Cord Protection Attachments  Water and MoistureWEEE TABLE OF CONTENTS CONFIGURATIONDVR CONFIGURATION MOUSE OPERATION6 REMOTE OPERATION FROM BROWSER NETWORKING OVERVIEW6.2.2 BROWSER SECURITY SETTINGInstalling ActiveX controls 6.2.11 PRODUCT OVERVIEW 1.1 FEATURESChapter Camera Power cable x Video & Audio cable x Alarm cable x 1.2 PACKAGE CONTENTS Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-Operating Screws x 1 pack Antenna x 1 set IR Remote Control x Battery xEMV400 - 4CH Mobile DVR 1.3 SPECIFICATIONSEmbedded 3-axis G Sensor data recorded alarm if separate user Multiple email notifications in response to alarms and eventsRequires real time network connectivity though cellular or WiFi service1.4 FRONT PANEL Record This LED ON indicates Record active Power This LED ON indicates Power onFigure 1-2 Rear Panel 1.5 REAR PANEL4 GPS Data Input Connect this connector to GPS receiver via GPS cable Please refer to the following diagrams for the system connections 1.6 SYSTEM CONNECTIONPOWER 1.7 REAR PANEL CONNECTORALARM IN 12V OUT CAM POWER1CAM POWER2 12V OUTUse the two Z-brackets supplied to mount it in any ways shown 1.8 INSTALLATION OF EMV400Interface Interface Suspend  Show all the possible ways to mount the DVR Equipment Required Quick Installation Guide  Unpack EverythingPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.11ALARM CONTACTS INSTALLATION 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION1.10 AUDIO INSTALLATION 1.13 NETWORK CONNECTION 1.12 USB-Mouse installation1.11.1 Alarm Input Contacts 1.11.2 Alarm Output RelayFigure 1-4 Network Connection through Patch Cable 1.13.1 Direct PC Connection through Crossover Network Cable1.13.2 Network Connection through Patch Cable Figure 1-3 Direct PC ConnectionPinout of straight patch cable 1.14 FINAL INSTALL PROCESS2.1.2 OSD Root Menu 2.1.1 How to select a channel2 MOUSE OPERATION 2.1 GENERAL USB MOUSE OPERATION2.1.3 Field Input Options Chapter 3 CONFIGURATION3.1 CONFIGURATION OF DVR 3.2 LOGINFigure 3-3 On-screen Configuration 3.3 On Screen Configuration MenuFigure 3-2 On-screen Keyboard Playback Bar 3.4.1 Time Search 3.4 SEARCH3.4.2 G Sensor Search Figure 3-6 Search Menu - GPS Search 3.4.3 GPS Speed SearchFigure 3-7 Search Menu - GPS Bordering Search button to return to the previous level of menuFigure 3-8 Search Menu - Event Search 3.4.4 Event SearchClick button to enter G Sensor search menu Prev Page Go to previous page Next Page Go to next pagePlay Playback selected item Delete Delete selected item Click button to return to the previous level of menuFigure 3-10 Archive Menu 3.5 ARCHIVE USB4.1 Configuration Menu 4 DVR CONFIGURATIONChapter Figure 4-2 Configuration Menu 4.2.1 Normal 4.2 CAMERA SETTINGFigure 4-5 Camera Settings-Video Loss 4.2.2 Video AdjustSpeed 4.2.3 Alarm4.3.1 Record 4.3 RECORD SETTING4.4.1 Alarm-Alarm Settings 4.4 ALARM/GPSBuzzer Check this box to enable the buzzer when an alarm occurs Alarm Select the alarm input trigger connection number from 1 toEnable Check box to enable response to that alarm trigger Transparent Alarm output remains as long as the alarm input is activeFigure 4-10 Alarm - Event Settings 4.4.2 Alarm-Event SettingsFigure 4-11 Alarm - Event - Fan Failure Fan FailureFigure 4-12 Alarm - Event - HD Temperature HD TemperatureFigure 4-13 Alarm - Event - HD Failure HD FailureFigure 4-14 Alarm - Event - HD Full HD FullFigure 4-15 Alarm - Event - HD Off HD OffFigure 4-16 Alarm - Event - Power Loss Power LossFigure 4-17 Alarm - Event - Network Loss Network LossFigure 4-18 Alarm - Event - GPS Loss GPS LossFigure 4-19 Alarm - Video Loss 4.4.3 Alarm - Video LossPage Figure 4-20 Alarm - G-Sensor 4.4.4 Alarm-G-Sensor SettingsFigure 4-21 Alarm - GPS Speed 4.4.5 Alarm-GPS SpeedFigure 4-22 Alarm - GPS Event Action 4.4.6 Alarm-GPS Event ActionFigure 4-23 Alarm - GPS Fencing 4.4.7 Alarm-GPS Fencing4.5.1 Date/Time Settings 4.5 Date/Time SettingFigure 4-25 Date/Time Settings-Daylight Saving 4.5.2 Daylight Saving4.6.1 Title 4.6 Display4.6.2 Monitor On Screen Display Main Monitor Main Monitor 4.6.3 LayoutClick button to set up Layout parameters 4 Up Type Layout type for the display switchFigure 4-29 Display-Sequence 4.6.4 Sequence4.7.1 LAN Settings 4.7 NETWORK SETTINGNetwork Type Click button to start LAN reconnection The default port for the EMV400 isWell Known Ports 0 thru Registered Ports 1024 thru Dynamic and/or Private Ports 49152 thruFigure 4-32 Network Menu - Wireless 4.7.2 Wireless SettingsAPN Access Point Name By local ISP setting 4.7.3 Mobile Connection SettingsNOTE For more reliable email service, use the server’s IP address 4.7.4 Email SettingsEverfocusDDNS 4.7.5 DDNS Settingscharacters particularly ~ ! @ # $ % & * + Click button to return to the previous level of menu Password Password of the dyndns accountHost name Host name created through the dyndns account User name User name of the dyndns accountFigure 4-37 Network Menu - Alarm Server 4.7.6 Alarm Server Settings4.8.1 User 4.8 SYSTEMFigure 4-40 System-User-Add EditFigure 4-41 System-User-Edit Local LocalRS232 4.8.2 I/O ControlControl RS485Everfocus. NOTE all cameras on the bus must use the same protocol Figure 4-43 System-I/O Control-GPS ControlDisk Info 4.8.3 DISK InfoFrom 4.8.4 LOGLog Type Next Page Go to the next page of log Close Close the window Clear Log Press button to clear the logExport Log to USB Press button to export log data to USB Prev Page Go to the previous page of logFigure 4-48 System-Settings 4.8.5 SETTINGSConfigurations 4.8.6 SERVICEFirmware Status Network Select network type from LAN, Wireless and Mobile4.9 INFORMATION System5.3 Gateway Address 5 Networking Overview5.1 Introduction to TCP/IP 5.2 Subnet Masks5.4 Virtual Ports 5.5 Pre-Installation5.6 What is your Network Setup? Crossover Ethernet Cable Pin outs 5.7 Simple One to One ConnectionConnection Procedure Page Page  Restart both the computer and the DVR  Click on the option that says “Use the following IP address”Straight Through Ethernet Cable Pin outs 5.8 Direct High Speed Modem ConnectionConnection Procedure  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Connection Procedure 5.9 Router or LAN ConnectionStraight Through Ethernet Cable Pin outs  Type “command” and click on OK  Log into the EverFocus DVR menu and go to the Network Setting Menu Exit from the Menu to save settings To manually assign an address o If using Windows Vista, choose Search insteadTo set DVR for Internet Connection through router 6 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO EMV400Chapter 6.2.1 Installing ActiveX controls 6.2 BROWSER SECURITY SETTINGPage Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do soNow, you will be able to see the remote live page 6.2.2 Enabling ActiveX Controls “Prompt” “Enable”Click the Refresh button to reload the page Close the window so you are back at the login screenInstall the ePlusDVR.cab file when prompted to do so Default password6.3 REMOTE LIVE VIEW System Setup Information Setup Copy Menu Search Menu Alarm/Event Setup Date/Time Setup Display Setup Network Setup5. In the main page, you will see live images in a 4-screen display Play Reverse the video 6.4 REMOTE PLAYBACKPlayback Control Keys Fast rewind the videoChapter 7 EVERFOCUS DDNS SETUPStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com 8.1 TYPICAL LINKSYS PORT FORWARDING 8 LINKSYS & D-LINK PORT FORWARDINGChapter Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule  There is no display coming from one of the channels on the DVR 9 TROUBLESHOOTING The DVR will not go into record mode  The DVR displays nothing on the main monitorPage Appendix APPENDIX A TIMING OF ALARM MODESt Event Alarm Reset Input Event Alarm Durationt Duration = t Reaction Timeout Mode Retrigger of Alarms APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULES CaseRecord Mode Normal + Event Record With Recording daysCase Record Mode Normal + Event or Event Only Record With Preset SettingPreset Setting Option Appendix APPENDIX C REMOTE CONTROLJapan Office Headquarter OfficeBeijing office European Office