Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 user manual  Installing the Cameras and Monitor

Models: EMV400

1 129

Page 24

Installing the Camera(s) and Monitor

The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be installed in different locations (for example, use the waterproof camera to the outside of vehicle). For installation procedure, please refer to the guide that came with the camera(s) you purchased.

The Monitor power supply connects from the Automotive adapter (cigarette plug) Monitor and cameras must be purchased separately.

LCD Monitor

Connect the Camera(s)Connect the power connector from the camera(s) harness into the CAMERA POWER OUT jack on the back panel of the DVR.

Connect the primary camera(s) video connector to the CAMERA INPUT and the audio connector to the AUDIO INPUT in the back panel.

Adjust the camera(s). After the camera is installed, connect a monitor directly to the camera and observe the image.

Make any adjustment if necessary.

Page 24

Image 24

EverFocus EMV400 user manual  Installing the Cameras and Monitor

Contents

EMV400 DVR User ManualEMV400 DVR Instruction Manual Release Date OctSafety Precautions  Cleaning Read Instructions  Retain Instructions Power Cord Protection  Attachments Water and Moisture  ServicingWEEE CONFIGURATION DVR CONFIGURATIONMOUSE OPERATION TABLE OF CONTENTSNETWORKING OVERVIEW 6 REMOTE OPERATION FROM BROWSERBROWSER SECURITY SETTING Installing ActiveX controls6.2.1 6.2.21.1 FEATURES 1 PRODUCT OVERVIEWChapter 1.2 PACKAGE CONTENTS  Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-OperatingScrews x 1 pack Antenna x 1 set IR Remote Control x Battery x Camera Power cable x Video & Audio cable x Alarm cable x1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVRMultiple email notifications in response to alarms and events Requires real time network connectivity though cellular or WiFiservice Embedded 3-axis G Sensor data recorded alarm if separate user1.4 FRONT PANEL Power This LED ON indicates Power on Record This LED ON indicates Record active1.5 REAR PANEL Figure 1-2 Rear Panel4 GPS Data Input Connect this connector to GPS receiver via GPS cable 1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connections1.7 REAR PANEL CONNECTOR POWERALARM IN CAM POWER1 CAM POWER212V OUT 12V OUT1.8 INSTALLATION OF EMV400 Interface InterfaceSuspend  Show all the possible ways to mount the DVR Use the two Z-brackets supplied to mount it in any ways shownQuick Installation Guide  Unpack Everything  Equipment RequiredPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION 1.11ALARM CONTACTS INSTALLATION1.10 AUDIO INSTALLATION 1.12 USB-Mouse installation 1.11.1 Alarm Input Contacts1.11.2 Alarm Output Relay 1.13 NETWORK CONNECTION1.13.1 Direct PC Connection through Crossover Network Cable 1.13.2 Network Connection through Patch CableFigure 1-3 Direct PC Connection Figure 1-4 Network Connection through Patch Cable1.14 FINAL INSTALL PROCESS Pinout of straight patch cable2.1.1 How to select a channel 2 MOUSE OPERATION2.1 GENERAL USB MOUSE OPERATION 2.1.2 OSD Root Menu2.1.3 Field Input Options 3 CONFIGURATION 3.1 CONFIGURATION OF DVR3.2 LOGIN Chapter3.3 On Screen Configuration Menu Figure 3-3 On-screen ConfigurationFigure 3-2 On-screen Keyboard Playback Bar 3.4 SEARCH 3.4.1 Time Search3.4.2 G Sensor Search 3.4.3 GPS Speed Search Figure 3-6 Search Menu - GPS Searchbutton to return to the previous level of menu Figure 3-7 Search Menu - GPS Bordering Search3.4.4 Event Search Figure 3-8 Search Menu - Event SearchPrev Page Go to previous page Next Page Go to next page Play Playback selected item Delete Delete selected itemClick button to return to the previous level of menu Click button to enter G Sensor search menu3.5 ARCHIVE USB Figure 3-10 Archive Menu4 DVR CONFIGURATION 4.1 Configuration MenuChapter Figure 4-2 Configuration Menu 4.2 CAMERA SETTING 4.2.1 Normal4.2.2 Video Adjust Figure 4-5 Camera Settings-Video Loss4.2.3 Alarm Speed4.3 RECORD SETTING 4.3.1 Record4.4 ALARM/GPS 4.4.1 Alarm-Alarm SettingsAlarm Select the alarm input trigger connection number from 1 to Enable Check box to enable response to that alarm triggerTransparent Alarm output remains as long as the alarm input is active Buzzer Check this box to enable the buzzer when an alarm occurs4.4.2 Alarm-Event Settings Figure 4-10 Alarm - Event SettingsFan Failure Figure 4-11 Alarm - Event - Fan FailureHD Temperature Figure 4-12 Alarm - Event - HD TemperatureHD Failure Figure 4-13 Alarm - Event - HD FailureHD Full Figure 4-14 Alarm - Event - HD FullHD Off Figure 4-15 Alarm - Event - HD OffPower Loss Figure 4-16 Alarm - Event - Power LossNetwork Loss Figure 4-17 Alarm - Event - Network LossGPS Loss Figure 4-18 Alarm - Event - GPS Loss4.4.3 Alarm - Video Loss Figure 4-19 Alarm - Video LossPage 4.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm - G-Sensor4.4.5 Alarm-GPS Speed Figure 4-21 Alarm - GPS Speed4.4.6 Alarm-GPS Event Action Figure 4-22 Alarm - GPS Event Action4.4.7 Alarm-GPS Fencing Figure 4-23 Alarm - GPS Fencing4.5 Date/Time Setting 4.5.1 Date/Time Settings4.5.2 Daylight Saving Figure 4-25 Date/Time Settings-Daylight Saving4.6 Display 4.6.1 Title4.6.2 Monitor On Screen Display Main Monitor 4.6.3 Layout Click button to set up Layout parameters4 Up Type Layout type for the display switch Main Monitor4.6.4 Sequence Figure 4-29 Display-Sequence4.7 NETWORK SETTING 4.7.1 LAN SettingsNetwork Type The default port for the EMV400 is Well Known Ports 0 thru Registered Ports 1024 thruDynamic and/or Private Ports 49152 thru Click button to start LAN reconnection4.7.2 Wireless Settings Figure 4-32 Network Menu - Wireless4.7.3 Mobile Connection Settings APN Access Point Name By local ISP setting4.7.4 Email Settings NOTE For more reliable email service, use the server’s IP address4.7.5 DDNS Settings EverfocusDDNScharacters particularly ~ ! @ # $ % & * + Password Password of the dyndns account Host name Host name created through the dyndns accountUser name User name of the dyndns account Click button to return to the previous level of menu4.7.6 Alarm Server Settings Figure 4-37 Network Menu - Alarm Server4.8 SYSTEM 4.8.1 UserEdit Figure 4-40 System-User-AddFigure 4-41 System-User-Edit Local Local4.8.2 I/O Control RS232RS485 ControlEverfocus. NOTE all cameras on the bus must use the same protocol Control Figure 4-43 System-I/O Control-GPS4.8.3 DISK Info Disk Info4.8.4 LOG FromLog Type Clear Log Press button to clear the log Export Log to USB Press button to export log data to USBPrev Page Go to the previous page of log Next Page Go to the next page of log Close Close the window4.8.5 SETTINGS Figure 4-48 System-Settings4.8.6 SERVICE ConfigurationsFirmware Network Select network type from LAN, Wireless and Mobile 4.9 INFORMATIONSystem Status5 Networking Overview 5.1 Introduction to TCP/IP5.2 Subnet Masks 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page  Click on the option that says “Use the following IP address”  Restart both the computer and the DVR5.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outsConnection Procedure  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address 5.9 Router or LAN Connection Connection ProcedureStraight Through Ethernet Cable Pin outs  Log into the EverFocus DVR menu and go to the Network Setting Menu  Exit from the Menu to save settings To manually assign an addresso If using Windows Vista, choose Search instead  Type “command” and click on OKTo set DVR for Internet Connection through router 6.1 CONNECTING TO EMV400 6 REMOTE OPERATION FROM BROWSERChapter 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsPage Install the MSXML file when prompted to do so Right click on the yellow bar and select “Run Add-on…”Now, you will be able to see the remote live page 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Close the window so you are back at the login screen Install the ePlusDVR.cab file when prompted to do soDefault password Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW Alarm/Event Setup Date/Time Setup Display Setup Network Setup System Setup Information Setup Copy Menu Search Menu5. In the main page, you will see live images in a 4-screen display 6.4 REMOTE PLAYBACK Playback Control KeysFast rewind the video Play Reverse the video7 EVERFOCUS DDNS SETUP ChapterStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com 8 LINKSYS & D-LINK PORT FORWARDING 8.1 TYPICAL LINKSYS PORT FORWARDINGChapter Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule 9 TROUBLESHOOTING  The DVR will not go into record mode The DVR displays nothing on the main monitor  There is no display coming from one of the channels on the DVRPage APPENDIX A TIMING OF ALARM MODES AppendixAlarm Reset Input Event Alarm Duration t Eventt Duration = t Reaction Timeout Mode Retrigger of Alarms Case Record Mode Normal + EventRecord With Recording days APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESRecord With Preset Setting Case Record Mode Normal + Event or Event OnlyPreset Setting Option APPENDIX C REMOTE CONTROL AppendixHeadquarter Office Beijing officeEuropean Office Japan Office