Manuals / EverFocus / TV and Video / DVR

EverFocus EMV400 user manual GPS Data Input Connect this connector to GPS receiver via GPS cable

Models: EMV400

1 129

Page 16

○4 GPS Data Input: Connect this connector to GPS receiver via GPS cable.

○5 Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED means network is connected, amber LED flickers when data is being exchanged.

○6 USB port: USB port recommended for connecting the USB mouse.

○7 RS232 socket: Connect this connector to RS232/RS485 compatible device.

○8 Main Monitor Out: Main monitor for live and playback display and on-screen display. (same output as

the main monitor out at front panel, no conflict between these 2 outputs, they both can be connected simultaneously)

○9 Alarm Input: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts.

○10 Alarm Output: N.C or N.O type alarm out (form “C”).

○11 Event Input: Reserved port.

○12 RS485 Input: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices.

○13 802.11 b / g WiFi: Connection of the antenna.

Page 16

Image 16

EverFocus EMV400 user manual GPS Data Input Connect this connector to GPS receiver via GPS cable

Contents

EMV400 DVR User ManualEMV400 DVR Instruction Manual Release Date OctSafety Precautions  Cleaning Read Instructions  Retain Instructions Power Cord Protection  Attachments Water and Moisture  ServicingWEEE CONFIGURATION DVR CONFIGURATIONMOUSE OPERATION TABLE OF CONTENTSNETWORKING OVERVIEW 6 REMOTE OPERATION FROM BROWSERBROWSER SECURITY SETTING Installing ActiveX controls6.2.1 6.2.21 PRODUCT OVERVIEW 1.1 FEATURESChapter 1.2 PACKAGE CONTENTS  Temperature -20ºC ~ 55ºC Operating, -20ºC ~ 85ºC Non-OperatingScrews x 1 pack Antenna x 1 set IR Remote Control x Battery x Camera Power cable x Video & Audio cable x Alarm cable x1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVRMultiple email notifications in response to alarms and events Requires real time network connectivity though cellular or WiFiservice Embedded 3-axis G Sensor data recorded alarm if separate user1.4 FRONT PANEL Power This LED ON indicates Power on Record This LED ON indicates Record active1.5 REAR PANEL Figure 1-2 Rear Panel4 GPS Data Input Connect this connector to GPS receiver via GPS cable 1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connectionsPOWER 1.7 REAR PANEL CONNECTORALARM IN CAM POWER1 CAM POWER212V OUT 12V OUT1.8 INSTALLATION OF EMV400 Interface InterfaceSuspend  Show all the possible ways to mount the DVR Use the two Z-brackets supplied to mount it in any ways shownQuick Installation Guide  Unpack Everything  Equipment RequiredPage Trunk Users are suggested to use “suspend” for mounting option  Installing the Cameras and Monitor 1.11ALARM CONTACTS INSTALLATION 1.9 VIDEO INPUTS/OUTPUTS INSTALLATION1.10 AUDIO INSTALLATION 1.12 USB-Mouse installation 1.11.1 Alarm Input Contacts1.11.2 Alarm Output Relay 1.13 NETWORK CONNECTION1.13.1 Direct PC Connection through Crossover Network Cable 1.13.2 Network Connection through Patch CableFigure 1-3 Direct PC Connection Figure 1-4 Network Connection through Patch Cable1.14 FINAL INSTALL PROCESS Pinout of straight patch cable2.1.1 How to select a channel 2 MOUSE OPERATION2.1 GENERAL USB MOUSE OPERATION 2.1.2 OSD Root Menu2.1.3 Field Input Options 3 CONFIGURATION 3.1 CONFIGURATION OF DVR3.2 LOGIN ChapterFigure 3-3 On-screen Configuration 3.3 On Screen Configuration MenuFigure 3-2 On-screen Keyboard Playback Bar 3.4 SEARCH 3.4.1 Time Search3.4.2 G Sensor Search 3.4.3 GPS Speed Search Figure 3-6 Search Menu - GPS Searchbutton to return to the previous level of menu Figure 3-7 Search Menu - GPS Bordering Search3.4.4 Event Search Figure 3-8 Search Menu - Event SearchPrev Page Go to previous page Next Page Go to next page Play Playback selected item Delete Delete selected itemClick button to return to the previous level of menu Click button to enter G Sensor search menu3.5 ARCHIVE USB Figure 3-10 Archive Menu4.1 Configuration Menu 4 DVR CONFIGURATIONChapter Figure 4-2 Configuration Menu 4.2 CAMERA SETTING 4.2.1 Normal4.2.2 Video Adjust Figure 4-5 Camera Settings-Video Loss4.2.3 Alarm Speed4.3 RECORD SETTING 4.3.1 Record4.4 ALARM/GPS 4.4.1 Alarm-Alarm SettingsAlarm Select the alarm input trigger connection number from 1 to Enable Check box to enable response to that alarm triggerTransparent Alarm output remains as long as the alarm input is active Buzzer Check this box to enable the buzzer when an alarm occurs4.4.2 Alarm-Event Settings Figure 4-10 Alarm - Event SettingsFan Failure Figure 4-11 Alarm - Event - Fan FailureHD Temperature Figure 4-12 Alarm - Event - HD TemperatureHD Failure Figure 4-13 Alarm - Event - HD FailureHD Full Figure 4-14 Alarm - Event - HD FullHD Off Figure 4-15 Alarm - Event - HD OffPower Loss Figure 4-16 Alarm - Event - Power LossNetwork Loss Figure 4-17 Alarm - Event - Network LossGPS Loss Figure 4-18 Alarm - Event - GPS Loss4.4.3 Alarm - Video Loss Figure 4-19 Alarm - Video LossPage 4.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm - G-Sensor4.4.5 Alarm-GPS Speed Figure 4-21 Alarm - GPS Speed4.4.6 Alarm-GPS Event Action Figure 4-22 Alarm - GPS Event Action4.4.7 Alarm-GPS Fencing Figure 4-23 Alarm - GPS Fencing4.5 Date/Time Setting 4.5.1 Date/Time Settings4.5.2 Daylight Saving Figure 4-25 Date/Time Settings-Daylight Saving4.6.1 Title 4.6 Display4.6.2 Monitor On Screen Display Main Monitor 4.6.3 Layout Click button to set up Layout parameters4 Up Type Layout type for the display switch Main Monitor4.6.4 Sequence Figure 4-29 Display-Sequence4.7 NETWORK SETTING 4.7.1 LAN SettingsNetwork Type The default port for the EMV400 is Well Known Ports 0 thru Registered Ports 1024 thruDynamic and/or Private Ports 49152 thru Click button to start LAN reconnection4.7.2 Wireless Settings Figure 4-32 Network Menu - Wireless4.7.3 Mobile Connection Settings APN Access Point Name By local ISP setting4.7.4 Email Settings NOTE For more reliable email service, use the server’s IP addressEverfocusDDNS 4.7.5 DDNS Settingscharacters particularly ~ ! @ # $ % & * + Password Password of the dyndns account Host name Host name created through the dyndns accountUser name User name of the dyndns account Click button to return to the previous level of menu4.7.6 Alarm Server Settings Figure 4-37 Network Menu - Alarm Server4.8 SYSTEM 4.8.1 UserFigure 4-40 System-User-Add EditFigure 4-41 System-User-Edit Local Local4.8.2 I/O Control RS232Control RS485Everfocus. NOTE all cameras on the bus must use the same protocol Control Figure 4-43 System-I/O Control-GPS4.8.3 DISK Info Disk InfoFrom 4.8.4 LOGLog Type Clear Log Press button to clear the log Export Log to USB Press button to export log data to USBPrev Page Go to the previous page of log Next Page Go to the next page of log Close Close the window4.8.5 SETTINGS Figure 4-48 System-SettingsConfigurations 4.8.6 SERVICEFirmware Network Select network type from LAN, Wireless and Mobile 4.9 INFORMATIONSystem Status5 Networking Overview 5.1 Introduction to TCP/IP5.2 Subnet Masks 5.3 Gateway Address5.5 Pre-Installation 5.4 Virtual Ports5.6 What is your Network Setup? 5.7 Simple One to One Connection Crossover Ethernet Cable Pin outsConnection Procedure Page Page  Click on the option that says “Use the following IP address”  Restart both the computer and the DVRStraight Through Ethernet Cable Pin outs 5.8 Direct High Speed Modem ConnectionConnection Procedure  Note If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network settings. Therefore, it can use a dynamic IP address Connection Procedure 5.9 Router or LAN ConnectionStraight Through Ethernet Cable Pin outs  Log into the EverFocus DVR menu and go to the Network Setting Menu  Exit from the Menu to save settings To manually assign an addresso If using Windows Vista, choose Search instead  Type “command” and click on OKTo set DVR for Internet Connection through router 6 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO EMV400Chapter 6.2 BROWSER SECURITY SETTING 6.2.1 Installing ActiveX controlsPage Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do soNow, you will be able to see the remote live page 6.2.2 Enabling ActiveX Controls “Enable” “Prompt”Close the window so you are back at the login screen Install the ePlusDVR.cab file when prompted to do soDefault password Click the Refresh button to reload the page6.3 REMOTE LIVE VIEW System Setup Information Setup Copy Menu Search Menu Alarm/Event Setup Date/Time Setup Display Setup Network Setup5. In the main page, you will see live images in a 4-screen display 6.4 REMOTE PLAYBACK Playback Control KeysFast rewind the video Play Reverse the video7 EVERFOCUS DDNS SETUP ChapterStep 5. You should now be able to connect by typing the name you created into the address bar. Example http//hostname.everfocusddns.com 8.1 TYPICAL LINKSYS PORT FORWARDING 8 LINKSYS & D-LINK PORT FORWARDINGChapter Here is an example for how the port information might look 8.2 TYPICAL D-LINK PORT FORWARDING Virtual Server - Select Enabled or Disabled Schedule 9 TROUBLESHOOTING  The DVR will not go into record mode The DVR displays nothing on the main monitor  There is no display coming from one of the channels on the DVRPage APPENDIX A TIMING OF ALARM MODES Appendixt Event Alarm Reset Input Event Alarm Durationt Duration = t Reaction Timeout Mode Retrigger of Alarms Case Record Mode Normal + EventRecord With Recording days APPENDIX B EXPRESS SETUP RECORDING VALUE SELECTION RULESCase Record Mode Normal + Event or Event Only Record With Preset SettingPreset Setting Option APPENDIX C REMOTE CONTROL AppendixHeadquarter Office Beijing officeEuropean Office Japan Office