EverFocus EMV400 user manual Connection Procedure

Connection Procedure:

The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-over cable. Please remember you can not use a straight through network cable for this application

Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the other into the network card on the back of the computer.

Log into the EverFocus DVR menu and go to the Network Setting Menu.

You must use the Static IP option for this type of connection.

Assign an IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of 192.168.001.001. You can ignore DNS Server.

The next step is to set the computer’s network settings to match those of the DVR. You will need Administrator privileges on your Windows machine to do this.

To assign a fixed IP address in Windows 2000/XP.

87