9. OTHERS MENU

9.2DISPLAY SETTING menu

The DISPLAY SETTING menu sets various display parameters.

9.2.1Opening the DISPLAY SETTING menu

1.Press the [MENU] key to open the menu.

2.Select OTHERS and press the [MENU] key.

3.Select DISPLAY SETTING and press the [MENU] key.

MENU

 

QUIT

 

 

 

 

OTHERS

 

QUIT

 

 

 

DISPLAY SETTING

 

QUIT

 

 

 

DISPLAY MODE...

 

 

MODE SELECTION

: MODE KEY

TX/RX MODE

: ALTERNATIVE

H2/S DISPLAY

: LANDSCAPE

PRESENTATION MODE

: HEAD UP

TM DISPLAY RANGE

: 1.6R

BEARING REF

: SHIP HEADING

TILT LEVER

: TILT

S AUTO OFF CENTER

: OFF

H-SLICE WIDTH

: 16

 

H-SLICE PICT ADVC

: KP SYNC

NET COURSE MARK

: ENTER

MANUAL DEGAUSS

: EXECUTE

AUTO DEGAUSS

: INT SENSOR

DIMMER

: 10

 

KEY BEEP VOLUME

: 5

 

 

 

 

DISPLAY SETTNG menu

9.2.2DISPLAY SETTING menu description

DISPLAY MODE: Selects the display modes to use. The default modes are Horizontal, Horizontal1 + Horizontal2, Vertical1, Vertical 1 + Vertical 2, and History.

MODE SELECTION: Determines how display modes are chosen: cyclical pressing of [MODE] key or pull-down menu. The default setting is MODE KEY.

TX/RX MODE: Select how to transmit and receive in combination displays. ALTERNATIVE executes Tx and Rx one display at a time. MULTI simultaneously executes Tx and Rx on each display.

H2/S DISPLAY: Selects the combination mode of two horizontal displays: Landscape, Portrait, Right Inset and Left Inset.

PRESENTATION MODE: Chooses presentation mode. Head-up, north-up, course-up and true motion (requires ship’s speed and heading data) are available, and the default setting is head-up.

9-2

Page 196
Image 196
Furuno FSV-84 manual Opening the Display Setting menu, Display Setting menu description, Display Settng menu